Honda2019–2024Technical specifications

CR-V 2.0 i-MMD/e:HEV: Technical specifications

Workshop data for the 2-litre petrol (engine code LFB1). Covers engine, fluids, brakes, service, torques and air conditioning: the figures to check before a job or a parts order.

Common faults & fixes

Summary

Match the engine code (LFB1) to the vehicle before ordering parts or applying these figures.

Vehicle specifications

Overview

Make: Honda
Model: CR-V
Years: 2019–2024
Fuel: Petrol
Engine code: LFB1

Performance & efficiency

Power: 135 kW (184 hp)
Engine size: 1,993 cc
Cylinders: 4 · DOHC
Compression ratio: 13.0:1
Fuel system: Honda

Fluids & capacities

Engine oil (with the filter): 4.1 litres

All 96 specifications below

Engine & identification

Vehicle identification

No. of cylinders Type	4/DOHC
Capacity (Fiscal) cc	1993
Compression ratio :1	13,0
Suitable for unleaded petrol	Yes
Minimum octane rating RON	95
Ignition system Make	Honda
Ignition system Type	PGM-FI
Ignition system Description	Map-DI
Trigger location	Cam/Crankshaft
Fuel system Make	Honda
Fuel system Type	PGM-FI
Fuel system Description	MFI-s
Air metering Type	MAP
Combined ignition and fuel ECM	Yes
Diagnostic socket	Yes

Firing order

The firing order for the Honda CR-V 2.0 i-MMD/e:HEV (2019–2024) is 1-3-4-2.

Firing order	1-3-4-2

Engine oil & fluids

Engine oil

The Honda CR-V 2.0 i-MMD/e:HEV (2019–2024) takes 4.1 litres of engine oil with the filter.

See the reference table for the complete engine oil entries and their conditions.

Coolant

See the reference table for the complete coolant entries and their conditions.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Preferred engine oil
Ambient temperature range	All temperatures
Engine oil grade SAE	—
Engine oil options
Ambient temperature range	All temperatures
Engine oil grade SAE	0W-16, 0W-20
Engine oil classification API/ACEA	SM/A5
Engine with filter(s) litres	4.1
Other lubricants and capacities
Automatic transmission fluid Type	ATF DW-1
Automatic transmission (drain & refill) litres	4x2=2,2 AWD=2,4
If replacement of ATF was not due, transmission oil change indicator can only be reset using diagnostic equipment.
Automatic transmission (dry fill) litres	4x2=3,4 AWD=3,8
Automatic transmission fluid (ATF) - dry-fill capacity
Differential oil grade - rear SAE	DPSF-II
Differential rear litres	1.2
Ensure rear wheels rotate.
Coolant Type	Honda all season type 2
Cooling system - total capacity litres	5.6-6.8
Cooling system
Brake fluid Type	DOT 3/4

Brakes & wear limits

Brake disc thickness

Brake discs on the Honda CR-V 2.0 i-MMD/e:HEV (2019–2024) are replaced at a minimum thickness of 26 mm (ventilated) front and 8 mm rear.

Minimum disc thickness for replacement - ventilated Front	26 mm
Minimum disc thickness for replacement Rear	8 mm

Brake disc and drum dimensions

Disc thickness variation Front	0,015 mm
Disc thickness variation Rear	0,015 mm
Disc runout Front	0,04 mm
Disc runout Rear	0,04 mm
Minimum pad thickness Front	1,6 mm
Minimum pad thickness Rear	1,6 mm

Service & electrical

Tuning and emissions

Ignition timing - basic BTDC °Engine/rpm	20±2/1200 Not adjustable
Ignition advance checks °Engine/rpm	ECM Controlled
Idle speed rpm	1200±50 Not adjustable
CO level at idle speed - tailpipe Vol. % CO	Not adjustable
CO content at increased idle speed Vol. %	0,1
Lambda at increased idle λ	0,97-1,03

Service checks and adjustments

Oil pressure
Valve clearance - INLET mm	0,18-0,22 cold
Valve clearance - EXHAUST mm	Hydraulic
Compression pressure bar	8,8 Min
Oil pressure bar/rpm	—
Radiator cap bar	0,93-1,23
Radiator cap
Thermostat opens °C	76-80

Fuel system

System pressure bar	3,8-4,3

Spark plugs

Spark plugs Original equipment	NGK
Spark plug Type	ILZKAR7E11S
Electrode gap mm	1,0-1,1

Tightening torques

Other engine tightening torques
Cylinder head instructions	—
View more information	—
Main bearings Renew bolts/nuts	No
Main bearings Stage 1	—
View more information	—
Wait 30 minutes before filling engine with oil. Do NOT start engine for 3 hours. Excess sealant can cause engine damage.
Big end bearings Stage 1	20 Nm
View more information	—
Big end bearings
Big end bearings Stage 2	90°
Sump bolts	17 Nm
View more information	—
Assemble components within 4 minutes. Wait 30 minutes before filling engine with oil. Do NOT start engine for 3 hours. Excess sealant can cause engine damage.
Sump drain bolt	40 Nm
Flywheel/driveplate	-/1)30 Nm 2)74 Nm
Crankshaft pulley/damper centre bolt	70 Nm+90°
Camshaft sprocket/gear	—
Camshaft sprocket
Camshaft carrier/cap	—
View more information	—
Camshaft carrier/cap
Camshaft/rocker cover	1)3 Nm 2)7 Nm
View more information	—
Assemble components within 4 minutes. Wait 30 minutes before filling engine with oil. Do NOT start engine for 3 hours. Excess sealant can cause engine damage.
Inlet manifold to cylinder head	24 Nm
Exhaust manifold to cylinder head	32 Nm
Exhaust downpipe to manifold	54 Nm
Water pump	—
View more information	—
Electric water pump
Spark plugs	22 Nm
Fuel rail	12 Nm
Crankshaft position (CKP) sensor/engine speed (RPM) sensor	12 Nm
Camshaft position (CMP) sensor	12 Nm
Engine coolant temperature (ECT) sensor	12 Nm
Lambda sensor (Oxygen)	45 Nm
Knock sensor (KS)	22 Nm
Engine oil pressure switch	22 Nm
Oil filter	12 Nm
Chassis tightening torques
Front hub	328 Nm
Rear hub	AWD=181 Nm
Rear hub - wheel bearing housing bolts	98 Nm
Steering wheel	49 Nm
Steering rack/box mounting	93 Nm
Steering rack/box mounting
Steering track rod end	54 Nm
Brake disc to hub Front	10 Nm
Brake caliper to carrier Front	50 Nm
Brake caliper/carrier to hub Front	137 Nm
Brake disc to hub Rear	10 Nm
Brake caliper to carrier Rear	23 Nm
Brake caliper/carrier to hub Rear	108 Nm
ABS sensor Front	10 Nm
ABS sensor Rear	10 Nm
Road wheels	108 Nm

Air conditioning

No. of AC service connectors	2
Air conditioning restrictor type	Expansion valve
Compressor clutch/magnetic coupling	No
Compressor variable displacement solenoid	No
Air conditioning refrigerant Type	R1234yf
Air conditioning refrigerant quantity grams	440±25
Air conditioning oil group	POE
Air conditioning oil Type	Dens Oil 11
Air conditioning oil quantity cm³	128±7

Frequently asked questions

What is the firing order of the Honda CR-V 2.0 i-MMD/e:HEV?

The firing order for the Honda CR-V 2.0 i-MMD/e:HEV (2019–2024) is 1-3-4-2.

How much oil does the Honda CR-V 2.0 i-MMD/e:HEV take?

The Honda CR-V 2.0 i-MMD/e:HEV (2019–2024) takes 4.1 litres of engine oil with the filter. See the reference table for the complete engine oil entries and their conditions.

What is the minimum brake disc thickness for the Honda CR-V 2.0 i-MMD/e:HEV?

Brake discs on the Honda CR-V 2.0 i-MMD/e:HEV (2019–2024) are replaced at a minimum thickness of 26 mm (ventilated) front and 8 mm rear.