Honda2018–2021Technical specifications

CR-V 1.5 VTEC Turbo: Technical specifications

Workshop data for the 1.5-litre petrol (engine code L15BY). Covers engine, fluids, brakes, service, torques and air conditioning: the figures to check before a job or a parts order.

Common faults & fixes

Summary

Match the engine code (L15BY) to the vehicle before ordering parts or applying these figures.

Vehicle specifications

Overview

Make
Honda
Model
CR-V
Years
2018–2021
Fuel
Petrol
Engine code
L15BY

Performance & efficiency

Power
142 kW (193 hp)
Engine size
1,498 cc
Cylinders
4 · DOHC
Compression ratio
10.3:1
Fuel system
Honda

Fluids & capacities

Engine oil (with the filter)
3.5 litres
All 119 specifications below

Engine & identification

Vehicle identification

No. of cylinders Type4/DOHC
Capacity (Fiscal) cc1498
Compression ratio :110,3
Suitable for unleaded petrolYes
Minimum octane rating RON95
Ignition system MakeHonda
Ignition system TypePGM-FI
Ignition system DescriptionMap-DI
Trigger locationCam/Crankshaft
Fuel system MakeHonda
Fuel system TypePGM-FI
Fuel system DescriptionMFI-s(d)
Air metering TypeMAP
Combined ignition and fuel ECMYes
Diagnostic socketYes

Firing order

The firing order for the Honda CR-V 1.5 VTEC Turbo (2018–2021) is 1-3-4-2.

Firing order1-3-4-2

Valve clearances

Valve clearances for the Honda CR-V 1.5 VTEC Turbo (2018–2021) are 0,21-0,25 mm inlet and 0,25-0,29 mm exhaust, measured cold.

Valve clearance - INLET mm0,21-0,25 cold
Valve clearance - EXHAUST mm0,25-0,29 cold

Engine oil & fluids

Engine oil

The Honda CR-V 1.5 VTEC Turbo (2018–2021) takes 3.5 litres of engine oil with the filter.

See the reference table for the complete engine oil entries and their conditions.

Manual gearbox

See the reference table for the complete manual gearbox entries and their conditions.

Coolant

See the reference table for the complete coolant entries and their conditions.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Preferred engine oil
Ambient temperature range All temperatures
Engine oil grade SAE 0W-20
Engine oil options
Ambient temperature range All temperatures
Engine oil grade SAE 0W-30
Engine oil classification API/ACEA /C2, C3
Ambient temperature range All temperatures
Engine oil grade SAE 5W-30
Engine oil classification API/ACEA /C2, C3
Ambient temperature range -20°C➞
Engine oil grade SAE 10W-30 Synthetic
Engine oil classification API/ACEA /C2, C3
Engine with filter(s) litres 3.5
Other lubricants and capacities
Manual transmission oil grade SAE Honda MTF III
Manual transmission litres 1,9 4x4=2,2
Manual transmission (dry fill) litres 2,0 4x4=2,5
Automatic transmission fluid Type Honda HCF-2
Automatic transmission (drain & refill) litres —
Filling procedure must be completed within 20 minutes.
Automatic transmission (dry fill) litres 4x2=7,6-8,0 AWD=8,4-8,8
Automatic transmission fluid (ATF) - dry-fill capacity
Differential oil grade - rear SAE DPSF-II
Differential rear litres 1.2
Ensure rear wheels rotate.
Coolant Type Honda all season type 2
Cooling system - total capacity litres 6.2-6.3
Brake fluid Type DOT 3/4

Brakes & wear limits

Brake disc thickness

Brake discs on the Honda CR-V 1.5 VTEC Turbo (2018–2021) are replaced at a minimum thickness of 23 mm (ventilated) front and 8 mm rear.

Minimum disc thickness for replacement - ventilated Front23 mm
Minimum disc thickness
Minimum disc thickness for replacement Rear8 mm

Brake disc and drum dimensions

Minimum disc thickness
Disc thickness variation Front0,015 mm
Disc thickness variation Rear0,015 mm
Disc runout Front0,04 mm
Disc runout Rear0,04 mm
Minimum pad thickness Front1,6 mm
Minimum pad thickness Rear1,6 mm

Service & electrical

Battery

The Honda CR-V 1.5 VTEC Turbo (2018–2021) uses a 12 V, 60 Ah battery.

Battery V/RC(Ah)12 (60)

Tuning and emissions

Ignition timing - basic BTDC °Engine/rpm4±2/720 Not adjustable
Ignition advance checks °Engine/rpmECM Controlled
Idle speed rpm720±50 Not adjustable
CO level at idle speed - tailpipe Vol. % CONot adjustable
CO content at increased idle speed Vol. %0,1
Lambda at increased idle λ0,97-1,03

Service checks and adjustments

Compression pressure bar9,8 Min
Oil pressure bar/rpm0,9/720
Radiator cap bar0,93-1,23
Thermostat opens °C76-80

Fuel system

Fuel feed/lift pump delivery pressure bar3,9-4,4

Spark plugs

Spark plugs Original equipmentNGK
Spark plug TypeILZKAR8J8SY
Electrode gap mm0,7-0,8
Spark plugs MakeNGK
Spark plug TypeILZKAR8J8SY
Electrode gap mm0,7-0,8

Tightening torques

Cylinder head bolt torque

The cylinder head bolts on the Honda CR-V 1.5 VTEC Turbo (2018–2021) are tightened in 4 stages: 15 Nm, then 30 Nm, then 80°, then a final 85°.

Cylinder head
Renew boltsYes
Tighten15 Nm
Tighten30 Nm
Tighten80°
Tighten85°
Cylinder head instructions—
Other engine tightening torques
Main bearings Renew bolts/nutsNo
Main bearings Stage 130 Nm
Main bearings Stage 240°
Big end bearings Renew bolts/nuts—
View more information—
Big end bearings
Big end bearings Stage 113 Nm
Big end bearings Stage 290°
Oil pump to cylinder block12 Nm
Sump bolts12 Nm
View more information—
Wait 30 minutes before filling engine with oil. Do NOT start engine for 3 hours.
Sump drain bolt40 Nm
Flywheel/driveplate1)40 Nm 2)80 Nm 3)118 Nm/1)30 Nm 2)74 Nm
Crankshaft pulley/damper centre bolt70 Nm+90°
Camshaft sprocket/gear115 Nm
Camshaft carrier/cap1)5 Nm 2)18 Nm
View more information—
Camshaft carrier/cap
Camshaft/rocker cover1)3 Nm 2)7 Nm
View more information—
Assemble components within 4 minutes. Wait 30 minutes before filling engine with oil. Do NOT start engine for 3 hours. Excess sealant can cause engine damage.
Inlet manifold to cylinder head24 Nm
Exhaust downpipe to manifold54 Nm
Water pump12 Nm
Spark plugs22 Nm
Fuel rail12 Nm
Crankshaft position (CKP) sensor/engine speed (RPM) sensor12 Nm
Camshaft position (CMP) sensor12 Nm
Engine coolant temperature (ECT) sensor12 Nm
Lambda sensor (Oxygen)45 Nm
Knock sensor (KS)22 Nm
Engine oil pressure switch18 Nm
Oil filter12 Nm
Chassis tightening torques
Front hub328 Nm
Rear hubAWD=181 Nm
Rear hub - wheel bearing housing bolts98 Nm
Steering wheel49 Nm
Steering rack/box mounting97 Nm
Steering rack/box mounting
Steering track rod end54 Nm
Brake disc to hub Front10 Nm
Brake caliper to carrier Front50 Nm
Brake caliper/carrier to hub Front137 Nm
Brake disc to hub Rear10 Nm
Brake caliper to carrier Rear23 Nm
Brake caliper/carrier to hub Rear108 Nm
ABS sensor Front10 Nm
ABS sensor Rear10 Nm
Road wheels108 Nm

Air conditioning

No. of AC service connectors2
Air conditioning restrictor typeExpansion valve
Compressor clutch/magnetic couplingYes
Compressor variable displacement solenoidNo
Air conditioning refrigerant Type—
Do not mix R134a with R1234yf.
Air conditioning refrigerant quantity grams460±25
Air conditioning refrigerant quantity
Air conditioning oil groupR134a=PAG R1234yf=POE
Air conditioning oil TypeR134a=Dens Oil 8 R1234yf=RL85HM
Air conditioning oil quantity cm³90±13

Frequently asked questions

What is the firing order of the Honda CR-V 1.5 VTEC Turbo?

The firing order for the Honda CR-V 1.5 VTEC Turbo (2018–2021) is 1-3-4-2.

How much oil does the Honda CR-V 1.5 VTEC Turbo take?

The Honda CR-V 1.5 VTEC Turbo (2018–2021) takes 3.5 litres of engine oil with the filter. See the reference table for the complete engine oil entries and their conditions.

What are the valve clearances for the Honda CR-V 1.5 VTEC Turbo?

Valve clearances for the Honda CR-V 1.5 VTEC Turbo (2018–2021) are 0,21-0,25 mm inlet and 0,25-0,29 mm exhaust, measured cold.

What is the cylinder head torque for the Honda CR-V 1.5 VTEC Turbo?

The cylinder head bolts on the Honda CR-V 1.5 VTEC Turbo (2018–2021) are tightened in 4 stages: 15 Nm, then 30 Nm, then 80°, then a final 85°.

What is the minimum brake disc thickness for the Honda CR-V 1.5 VTEC Turbo?

Brake discs on the Honda CR-V 1.5 VTEC Turbo (2018–2021) are replaced at a minimum thickness of 23 mm (ventilated) front and 8 mm rear.

What battery does the Honda CR-V 1.5 VTEC Turbo use?

The Honda CR-V 1.5 VTEC Turbo (2018–2021) uses a 12 V, 60 Ah battery.

More on the CR-V