Engine & fuel system
3 documented faults — symptoms, causes and workshop fixes.
Engine malfunction indicator lamp (MIL) illuminated
Overview
- Affects
- All models with 2.0 petrol engines, →2013.
- Fault codes
P0505P1315P2282- Remedy
- Fit new part
- Parts
- 1 part
Symptoms
Engine misfire.
Cause
Intake manifold blanking plug loose or fallen out.
Repair
- Fit new blanking plug to intake manifold.
- Secure blanking plug with cable tie.
Parts1 part
| Part | Part number | Qty |
|---|---|---|
| Intake manifold blanking plug | LR052965 | 1 |
Data: Motorwise Workshop. Bulletin 2.
Engine malfunction indicator lamp (MIL) illuminated
Overview
- Affects
- All models with 20PT engine code.
- Fault codes
U0101U0128U0138U0140U0212- Remedy
- Software update
Cause
Engine control module (ECM) software fault.
Repair
- Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
- If no fault(s) found: Re-program engine control module (ECM) with upgraded software.
Data: Motorwise Workshop. Bulletin 3.
Engine malfunction indicator lamp (MIL) illuminated. Trouble code stored: P008B
Overview
- Affects
- All models with 2.0 petrol engines, 2012→.
- Remedy
- Fit new part
Cause
Fuel low pressure sensor faulty.
Repair
- Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
- If no fault(s) found: Fit new fuel low pressure sensor.
Data: Motorwise Workshop. Bulletin 4.
Electrical & ignition
1 documented fault — symptoms, causes and workshop fixes.
Intermittent self-activation of alarm system siren
Symptoms
Audible warning sounds when locking vehicle. Bonnet open warning message displayed in instrument panel.
Cause
Bonnet switch faulty.
Repair
- Fit new bonnet switch. Bonnet switch integral to bonnet latch.
Parts1 part
| Part | Part number | Qty |
|---|---|---|
| Bonnet switch | LR054331 | 1 |
Data: Motorwise Workshop. Bulletin 1.
Air conditioning & heating
1 documented fault — symptoms, causes and workshop fixes.
Engine malfunction indicator lamp (MIL) illuminates immediately after auxiliary heater operation. Trouble code stored: P2610-85
Overview
- Affects
- All models with 2.0 petrol engine.
- Fault codes
P2610- Remedy
- Software update
Cause
Engine control module (ECM) software fault.
Repair
- Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
- If no fault(s) found: Re-program engine control module (ECM) with upgraded software.
Data: Motorwise Workshop. Bulletin 5.
Glossary
Technical terms used in this guide.
- ECM
- Engine control module — the electronic unit that manages the engine
- Control Module
- A control unit for one of the vehicle's systems (engine, gearbox, brakes, body, and so on)
- Instrument Panel
- The dashboard display that shows warning lights and messages
- Intake Manifold
- The housing that distributes air into the cylinders
- Re-Program
- Update the software on a control module using the manufacturer's diagnostic tool
- Bonnet Switch
- The switch that tells the alarm whether the bonnet is open
- Misfire
- One or more cylinders not firing correctly — the engine runs roughly or loses power
Frequently asked questions
What are the common faults with the Land Rover Freelander 2 2.0 Si4?
This guide contains five workshop bulletins for the Land Rover Freelander 2 2.0 Si4. Of these, three concern the engine and fuel system and one the electrical and ignition. Symptoms, causes, repair steps and part numbers are shown where supplied.
Does every Land Rover Freelander 2 2.0 Si4 have these faults?
No. These are patterns documented across the model by workshops, not predictions for an individual vehicle. Where a fault applies only to certain vehicles or VIN ranges, that is listed with the fault.
Can I check for Land Rover Freelander 2 2.0 Si4 faults myself?
Many of them. The documented symptoms can be seen, heard or felt during a test drive.