Engine & identification
Vehicle identification
| No. of cylinders Type | 4/DOHC |
|---|---|
| Capacity cc | 2179 |
| Compression ratio :1 | 15,8 |
| Fuel system Make | Bosch |
Injection system
| Air metering Type | Mass/MAP |
|---|---|
| Fuel/injection pump assembly Make | Bosch |
| Pump type | Common rail |
| Fuel main pump delivery pressure bar | 1600 |
| Injector nozzle Make | Bosch |
Injection sequence
The injection sequence for the Land Rover Freelander 2 2.2 TD4 (2010–2015) is 1-3-4-2.
| Injection sequence | 1-3-4-2 |
|---|
Valve clearances
Valve clearances on the Land Rover Freelander 2 2.2 TD4 (2010–2015) are hydraulic — they self-adjust, so no manual clearance figure applies.
| Valve clearance - INLET mm | Hydraulic |
|---|---|
| Valve clearance - EXHAUST mm | Hydraulic |
Engine oil & fluids
Engine oil
The Land Rover Freelander 2 2.2 TD4 (2010–2015) takes 5.9 litres of engine oil with the filter.
A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C934-B and API/ACEA classification /C1.
A listed engine oil option is SAE 5W-30 for all ambient temperatures, with oil specification WSS-M2C913-B.
A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C913-C.
Manual gearbox
The manual gearbox has a listed capacity of 1.9 litres.
Transfer box
See the reference table for the complete transfer box entries and their conditions.
Coolant
See the reference table for the complete coolant entries and their conditions.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 5W-30 Synthetic |
| Engine oil classification OEM | WSS-M2C934-B |
| Engine oil classification API/ACEA | /C1 |
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 5W-30 |
| Engine oil classification OEM | WSS-M2C913-B |
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 5W-30 Synthetic |
| Engine oil classification OEM | WSS-M2C913-C |
| Engine with filter(s) litres | 5.9 |
| Other lubricants and capacities | |
| Manual transmission oil grade SAE | — |
| Manual transmission litres | 1.9 |
| Automatic transmission fluid Type | — |
| Automatic transmission (dry fill) litres | — |
| View more information | — |
| With Active Driveline | |
| Differential oil grade - rear SAE | 80W-90 |
| Differential oil classification - rear | GL-5 |
| Differential rear litres | 0.7 |
| Transfer box oil grade SAE | Castrol BOT 118 Plus Synthetic |
| Transfer box litres | 0.8 |
| Coolant Type | Texaco XLC |
| Cooling system - total capacity litres | 8.0-8.5 |
| Brake fluid Type | DOT 4 |
| Power steering fluid Type | Pentosin CHF 202 |
| Power steering fluid litres | 1.0 |
Brakes & wear limits
Brake disc thickness
Brake discs on the Land Rover Freelander 2 2.2 TD4 (2010–2015) are replaced at a minimum thickness of 26 mm (ventilated) front and 9 mm or 18 mm (ventilated) rear.
| Minimum disc thickness for replacement - ventilated Front | 26 mm |
|---|---|
| Minimum disc thickness for replacement Rear | 9 mm |
| Minimum disc thickness for replacement - ventilated Rear | 18 mm |
Brake disc and drum dimensions
| Disc runout Front | 0,08 mm |
|---|---|
| Disc runout Rear | 0,08 mm |
| Minimum pad thickness Front | 2 mm |
| Minimum pad thickness Rear | 2 mm |
| Minimum shoe thickness Rear | 1 mm |
| Parking brake travel No. of notches | 3-9 |
Bar lengths use a square-root scale so small and large values stay readable.
Service & electrical
Tuning and emissions
| Oil temperature °C | 80 |
|---|---|
| Idle speed - for smoke test rpm | 650-850 |
| Governed speed range - for smoke test rpm | 4700-5000 |
Service checks and adjustments
| Oil pressure bar/rpm | 1,6/1750 |
|---|---|
| Radiator cap bar | 1,45 |
| Thermostat opens °C | 83 |
Tightening torques
Cylinder head bolt torque
The cylinder head bolts on the Land Rover Freelander 2 2.2 TD4 (2010–2015) are tightened in 4 stages: 20 Nm, then 60 Nm, then 110°, then a final 110°.
| Cylinder head | |
|---|---|
| Renew bolts | Yes |
| Tighten | 20 Nm |
| Tighten | 60 Nm |
| Tighten | 110° |
| Tighten | 110° |
| Cylinder head instructions | — | |
|---|---|---|
| Other engine tightening torques | ||
| Sump bolts | 9 Nm | |
| Sump drain bolt | 20 Nm | |
| Flywheel/driveplate | 33 Nm+34° | |
| Clutch pressure plate | 29 Nm | |
| Crankshaft pulley/damper centre bolt | 70 Nm+82° | |
| Camshaft sprocket/gear | 20 Nm+60° | |
| Camshaft carrier/cap | 11 Nm | |
| Camshaft/rocker cover | 10 Nm | |
| Injector/clamp | 5 Nm+130° | |
| Injector pipe unions | 25 Nm | |
| Glow plugs | 10 Nm | |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 10 Nm | |
| Camshaft position (CMP) sensor | 6 Nm | |
| Engine oil pressure switch | 35 Nm | |
| Oil filter | 25 Nm | |
| Chassis tightening torques | ||
| Front hub | 45 Nm+60° | |
| Rear hub | 330 Nm+30° | |
| Steering track rod end | 70 Nm | |
| Brake disc to hub Front | 35 Nm | |
| Brake caliper to carrier Front | 28 Nm | |
| Brake caliper/carrier to hub Front | 200 Nm | |
| Brake disc to hub Rear | 35 Nm | |
| Brake caliper to carrier Rear | 30 Nm | |
| Brake caliper/carrier to hub Rear | 110 Nm | |
| Road wheels | 1)70 Nm 2)133 Nm | |
Bar lengths use a square-root scale so small and large values stay readable.
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | Yes |
| Compressor variable displacement solenoid | No |
| Air conditioning refrigerant Type | R134a |
| Air conditioning refrigerant quantity grams | 730±10 |
| Air conditioning oil group | PAG |
| Air conditioning oil Type | WSH-M1C231-B |
| Air conditioning oil quantity cm³ | 200 |
| Air conditioning oil viscosity ISO | 46 |
Frequently asked questions
What is the injection sequence of the Land Rover Freelander 2 2.2 TD4?
The injection sequence for the Land Rover Freelander 2 2.2 TD4 (2010–2015) is 1-3-4-2.
How much oil does the Land Rover Freelander 2 2.2 TD4 take?
The Land Rover Freelander 2 2.2 TD4 (2010–2015) takes 5.9 litres of engine oil with the filter. A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C934-B and API/ACEA classification /C1. A listed engine oil option is SAE 5W-30 for all ambient temperatures, with oil specification WSS-M2C913-B. A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C913-C.
What are the valve clearances for the Land Rover Freelander 2 2.2 TD4?
Valve clearances on the Land Rover Freelander 2 2.2 TD4 (2010–2015) are hydraulic — they self-adjust, so no manual clearance figure applies.
What is the cylinder head torque for the Land Rover Freelander 2 2.2 TD4?
The cylinder head bolts on the Land Rover Freelander 2 2.2 TD4 (2010–2015) are tightened in 4 stages: 20 Nm, then 60 Nm, then 110°, then a final 110°.
What is the minimum brake disc thickness for the Land Rover Freelander 2 2.2 TD4?
Brake discs on the Land Rover Freelander 2 2.2 TD4 (2010–2015) are replaced at a minimum thickness of 26 mm (ventilated) front and 9 mm or 18 mm (ventilated) rear.