Land Rover2017–2020Technical specifications

Range Rover 2.0 Si4 P400e: Technical specifications

Workshop data for the 2-litre petrol (engine code PT204). Covers engine, fluids, brakes, service, torques and air conditioning: the figures to check before a job or a parts order.

Updated Common faults & fixes

Summary

Match the engine code (PT204) and chassis (L405) to the vehicle before ordering parts or applying these figures.

Vehicle specifications

Overview

Make
Land Rover
Model
Range Rover
Chassis
L405
Years
2017–2020
Fuel
Petrol
Engine code
PT204

Performance & efficiency

Power
297 kW (404 hp)
Engine size
1,997 cc
Cylinders
4 · DOHC
Compression ratio
9.5:1
Fuel system
MFI-s(d)

Fluids & capacities

Engine oil (with the filter)
7.0 litres
All 79 specifications below

Engine & identification

Vehicle identification

No. of cylinders Type4/DOHC
Capacity (Fiscal) cc1997
Compression ratio :19,5
Suitable for unleaded petrolYes
Minimum octane rating RON95
Ignition system DescriptionMap-DI
Trigger locationCam/Crankshaft
Fuel system DescriptionMFI-s(d)
Air metering TypeMass/MAP
Combined ignition and fuel ECMYes
Diagnostic socketYes

Ignition system

Ignition coil supply voltage + with ballast V12,0

Firing order

The firing order for the Land Rover Range Rover 2.0 Si4 P400e (2017–2020) is 1-3-4-2.

Firing order1-3-4-2

Valve clearances

Valve clearances on the Land Rover Range Rover 2.0 Si4 P400e (2017–2020) are hydraulic — they self-adjust, so no manual clearance figure applies.

Valve clearance - INLET mmHydraulic
Valve clearance - EXHAUST mmHydraulic

Engine oil & fluids

Engine oil

The Land Rover Range Rover 2.0 Si4 P400e (2017–2020) takes 7.0 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-20 for all ambient temperatures, with oil specification STJLR.03.5006.

Coolant

The listed coolant type is Havoline XLC. The recorded coolant colour is Orange. The listed total cooling-system capacity is 16.8 litres.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Engine oil options
Ambient temperature range All temperatures
Engine oil grade SAE 0W-20
Engine oil classification OEM STJLR.03.5006
Engine with filter(s) litres 7.0
View more information —
Other lubricants and capacities
Automatic transmission fluid Type Shell L12108 (ZF Lifeguard 8)
Automatic transmission (drain & refill) litres —
View more information —
Filling and checking level
Automatic transmission (dry fill) litres 7.2
Automatic transmission - dry fill capacity
Differential oil grade - front SAE 75W-90 Castrol SAF-XO
Differential front/AT litres 0.51-0.54
Differential oil grade - rear SAE Castrol BOT 750b
Differential rear litres 0.82-0.85
Transfer box oil grade SAE —
Transfer box oil grade
Transfer box litres —
Transfer box oil
Coolant Type Havoline XLC
Coolant Colour Orange
Cooling system - total capacity litres 16.8
Brake fluid Type DOT 4
Brake fluid classification LRES22BF03
Brake fluid litres 0.9

Brakes & wear limits

Brake disc thickness

Rear brake discs on the Land Rover Range Rover 2.0 Si4 P400e (2017–2020) are replaced at a minimum thickness of 23 mm (ventilated).

Minimum disc thickness for replacement - ventilated Front—
Minimum brake disc thickness - front
Minimum disc thickness for replacement - ventilated Rear23 mm

Brake disc and drum dimensions

Minimum brake disc thickness - front
Disc runout Front0,05 mm
Disc runout Rear0,07 mm
Minimum pad thickness Front—
Minimum brake pad thickness - front
Minimum pad thickness Rear3 mm

Service & electrical

Ignition timing

The ignition timing on the Land Rover Range Rover 2.0 Si4 P400e (2017–2020) is not adjustable.

Ignition timing - basic BTDC °Engine/rpmNot adjustable

Tuning and emissions

Ignition advance checks °Engine/rpmECM Controlled

Service checks and adjustments

Radiator cap bar1,40
Thermostat opens °C95

Fuel system

Fuel main pump delivery pressure bar200 Max

Spark plugs

Spark plug TypeH4P3-12405 (ACA)
Electrode gap mm0,60-0,65

Tightening torques

Cylinder head instructions—
Cylinder head
Renew boltsYes
Other engine tightening torques
Oil pump to cylinder block25 Nm
Sump bolts—
View more information—
Sump bolts
Sump drain bolt25 Nm
Flywheel/driveplate-/30 Nm+120°
Crankshaft pulley/damper bolts37 Nm+90°
Camshaft sprocket/gear25 Nm+60°
Camshaft carrier/cap—
View more information—
Camshaft carrier/cap
Inlet manifold to cylinder head12 Nm
Water pump12 Nm
Spark plugs23 Nm
Fuel rail1)20 Nm 2)30 Nm
Crankshaft position (CKP) sensor/engine speed (RPM) sensor8 Nm
Camshaft position (CMP) sensor8 Nm
Engine coolant temperature (ECT) sensor11 Nm
Lambda sensor (Oxygen)48 Nm
Knock sensor (KS)20 Nm
Oil filter27 Nm
Chassis tightening torques
Front hub120 Nm+60°
Rear hub120 Nm+60°
Steering wheel47 Nm
Steering rack/box mounting110 Nm+240°
Steering track rod end140 Nm
Brake disc to hub Front35 Nm
Brake caliper to carrier Front35 Nm
Brake caliper/carrier to hub Front133 Nm+60°
Brake disc to hub Rear35 Nm
Brake caliper to carrier Rear35 Nm
Brake caliper/carrier to hub Rear110 Nm+120°
ABS sensor Front9 Nm
ABS sensor Rear9 Nm
Road wheels—

Air conditioning

No. of AC service connectors2
Air conditioning restrictor typeExpansion valve
Compressor clutch/magnetic couplingNo
Compressor variable displacement solenoidNo
Air conditioning refrigerant Type—
Do not mix R134a with R1234yf.
Air conditioning refrigerant quantity grams950±10
Air conditioning refrigerant quantity
Air conditioning oil groupPAG
Air conditioning oil TypeSPA2
Air conditioning oil quantity cm³80

Frequently asked questions

What is the firing order of the Land Rover Range Rover 2.0 Si4 P400e?

The firing order for the Land Rover Range Rover 2.0 Si4 P400e (2017–2020) is 1-3-4-2.

How much oil does the Land Rover Range Rover 2.0 Si4 P400e take?

The Land Rover Range Rover 2.0 Si4 P400e (2017–2020) takes 7.0 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-20 for all ambient temperatures, with oil specification STJLR.03.5006.

What are the valve clearances for the Land Rover Range Rover 2.0 Si4 P400e?

Valve clearances on the Land Rover Range Rover 2.0 Si4 P400e (2017–2020) are hydraulic — they self-adjust, so no manual clearance figure applies.

What is the ignition timing for the Land Rover Range Rover 2.0 Si4 P400e?

The ignition timing on the Land Rover Range Rover 2.0 Si4 P400e (2017–2020) is not adjustable.

What is the minimum brake disc thickness for the Land Rover Range Rover 2.0 Si4 P400e?

Rear brake discs on the Land Rover Range Rover 2.0 Si4 P400e (2017–2020) are replaced at a minimum thickness of 23 mm (ventilated).

More on the Range Rover