Mazda2016–2019

3 1.6: Common faults & known problems

Common faults & known problems

1 known fault documented in workshop bulletins. Of these, one concerns the engine and fuel system. Symptoms, causes, repair steps and part numbers are shown where supplied.

Engine & fuel system

1 documented fault — symptoms, causes and workshop fixes.

Lack of power

Overview

Affects
All models with petrol engines, →04/16.
Fault codes
P0300P0301P0302P0303P0304
Remedy
Fit modified part
Parts
1 part

Symptoms

Engine malfunction indicator lamp (MIL) illuminated. Trouble codes stored: P0300, P0301, P0302, P0303, P0304. Erratic idle.

Cause

Faulty ignition coil(s). Note: This fault is only associated with ignition coils made by Yumebishi.

Repair

  1. Check ignition coil(s) for damage and/or high resistance.
  2. Fit modified ignition coils as necessary.
Parts1 part
Parts listed in the bulletin
PartPart numberQty
Ignition coilPE20-18-100AAs required

Data: Motorwise Workshop. Bulletin 1.

Glossary

Technical terms used in this guide.

MIL
Malfunction indicator lamp — the engine warning light on the dashboard
Trouble Codes
Standardised fault codes stored by the engine control module, read with a diagnostic tool

Frequently asked questions

What are the common faults with the Mazda 3 1.6?

This guide contains one workshop bulletin for the Mazda 3 1.6. Of these, one concerns the engine and fuel system. Symptoms, causes, repair steps and part numbers are shown where supplied.

Does every Mazda 3 1.6 have these faults?

No. These are patterns documented across the model by workshops, not predictions for an individual vehicle. Where a fault applies only to certain vehicles or VIN ranges, that is listed with the fault.

Can I check for Mazda 3 1.6 faults myself?

Many of them. The documented symptoms can be seen, heard or felt during a test drive.

Related guides

Glossary term

See in the glossary →