Toyota2020–2026Technical specifications

Proace City Proace City Verso 1.2: Technical specifications

Workshop data for the 1.2-litre petrol (engine code HNP). Covers engine, fluids, brakes, service, torques and air conditioning: the figures to check before a job or a parts order.

Summary

Match the engine code (HNP) to the vehicle before ordering parts or applying these figures.

Vehicle specifications

Overview

Make
Toyota
Model
Proace City Proace City Verso
Years
2020–2026
Fuel
Petrol
Engine code
HNP

Performance & efficiency

Power
81 kW (110 hp)
Engine size
1,199 cc
Cylinders
3 · DOHC
Fuel system
Valeo

Fluids & capacities

Engine oil (with the filter)
3.5 litres
All 87 specifications below

Engine & identification

Vehicle identification

No. of cylinders Type3/DOHC
Capacity (Fiscal) cc1199
Suitable for unleaded petrolYes
Minimum octane rating RON95
Ignition system MakeValeo
Ignition system TypeVD56
Ignition system DescriptionMap-DI
Trigger locationCam/Crankshaft
Fuel system MakeValeo
Fuel system TypeVD56
Fuel system DescriptionMFI-s(d)
Air metering TypeMAP
Combined ignition and fuel ECMYes
Diagnostic socketYes

Ignition system

Ignition coil supply voltage + with ballast V12,0

Firing order

The firing order for the Toyota Proace City Proace City Verso 1.2 (2020–2026) is 1-3-2.

Firing order1-3-2

Valve clearances

Valve clearances for the Toyota Proace City Proace City Verso 1.2 (2020–2026) are 0,28 mm inlet and 0,46 mm exhaust, measured cold.

Valve clearance - INLET mm0,28 cold
Valve clearance - EXHAUST mm0,46 cold

Engine oil & fluids

Engine oil

The Toyota Proace City Proace City Verso 1.2 (2020–2026) takes 3.5 litres of engine oil with the filter. The specified engine oil grade is SAE 5W-30 synthetic for all ambient temperatures, with oil specification FPW9.55535/03.

Manual gearbox

See the reference table for the complete manual gearbox entries and their conditions.

Coolant

See the reference table for the complete coolant entries and their conditions.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Engine oil options
Ambient temperature range All temperatures
Engine oil grade SAE 5W-30 Synthetic
Engine oil classification OEM FPW9.55535/03
Engine with filter(s) litres 3.5
Other lubricants and capacities
Manual transmission oil grade SAE Total Transmission HBVFE2 75W
Manual transmission litres 1.7
Manual transmission
Manual transmission (dry fill) litres 1.8
Coolant Type Freecor DSC
Brake fluid Type DOT 4+
Clutch fluid Type DOT 4+

Brakes & wear limits

Brake disc thickness

Rear brake discs on the Toyota Proace City Proace City Verso 1.2 (2020–2026) are replaced at a minimum thickness of 10 mm.

Minimum disc thickness for replacement - ventilated Front—
Minimum disc thickness - ventilated disc
Minimum disc thickness for replacement Rear10 mm

Brake disc and drum dimensions

Minimum disc thickness - ventilated disc
Disc thickness variation Front0,010 mm
Disc runout Front0,05 mm
Minimum pad thickness Front2 mm
Minimum pad thickness Rear2 mm

Service & electrical

Ignition timing

The ignition timing on the Toyota Proace City Proace City Verso 1.2 (2020–2026) is not adjustable.

Ignition timing - basic BTDC °Engine/rpmNot adjustable

Tuning and emissions

Ignition advance checks °Engine/rpmECM Controlled

Starting and charging

Battery V/RC(Ah)12

Service checks and adjustments

Compression pressure bar8,7-12,3
Oil pressure bar/rpm—

Fuel system

Fuel feed/lift pump delivery pressure bar4,8-5,2

Spark plugs

Spark plugs Original equipmentBosch
Spark plug TypeZR6SI332
Electrode gap mm0,7-0,8

Tightening torques

Cylinder head instructions—
Cylinder head
Renew boltsYes
Other engine tightening torques
Main bearings Renew bolts/nutsYes
Main bearings Stage 120 Nm
Main bearings Stage 2140°
Big end bearings Renew bolts/nutsYes
Big end bearings Stage 11)5 Nm 2)15 Nm
Big end bearings Stage 2120°
Oil pump to cylinder block8 Nm
Sump bolts—
View more information—
Lower sump
Sump drain bolt—
Sump plug
Flywheel/driveplate1)8 Nm 2)30 Nm+90°/-
Clutch pressure plate20 Nm
Crankshaft pulley/damper centre bolt50 Nm+180°
Crankshaft pulley/damper bolts1)20 Nm 2)25 Nm+45°
Camshaft sprocket/gear20 Nm+120°
Camshaft carrier/cap1)5 Nm 2)10 Nm
View more information—
Camshaft carrier/cap
Camshaft/rocker cover—
View more information—
Assemble components within 5 minutes.
Inlet manifold to cylinder head10 Nm
Exhaust manifold to cylinder head30 Nm
Exhaust downpipe to manifold20 Nm
Water pump8 Nm
Spark plugs22 Nm
Fuel rail20 Nm
Crankshaft position (CKP) sensor/engine speed (RPM) sensor8 Nm
Camshaft position (CMP) sensor8 Nm
Lambda sensor (Oxygen)50 Nm
Knock sensor (KS)20 Nm
Engine oil pressure switch18 Nm
Oil filter16 Nm
Chassis tightening torques
Front hub285 Nm
Rear hub - wheel bearing housing bolts115 Nm
Steering wheel35 Nm
Steering rack/box mounting120 Nm
Steering track rod end60 Nm
Brake disc to hub Front10 Nm
Brake caliper to carrier Front30 Nm
Brake caliper/carrier to hub Front45 Nm+35°
Brake disc to hub Rear8 Nm
Brake caliper to carrier Rear35 Nm
Brake caliper to carrier - rear
Brake caliper/carrier to hub Rear100 Nm
ABS sensor Front8 Nm
ABS sensor Rear8 Nm
Road wheels—

Air conditioning

No. of AC service connectors2
Air conditioning restrictor typeExpansion valve
Compressor clutch/magnetic couplingYes
Compressor variable displacement solenoidNo
Air conditioning refrigerant Type—
Do not mix R134a with R1234yf.
Air conditioning refrigerant quantity grams—
Refer to label under bonnet or on compressor.
Air conditioning oil groupPAG
Air conditioning oil TypeSPA2
Air conditioning oil quantity cm³120

Frequently asked questions

What is the firing order of the Toyota Proace City Proace City Verso 1.2?

The firing order for the Toyota Proace City Proace City Verso 1.2 (2020–2026) is 1-3-2.

How much oil does the Toyota Proace City Proace City Verso 1.2 take?

The Toyota Proace City Proace City Verso 1.2 (2020–2026) takes 3.5 litres of engine oil with the filter. The specified engine oil grade is SAE 5W-30 synthetic for all ambient temperatures, with oil specification FPW9.55535/03.

What are the valve clearances for the Toyota Proace City Proace City Verso 1.2?

Valve clearances for the Toyota Proace City Proace City Verso 1.2 (2020–2026) are 0,28 mm inlet and 0,46 mm exhaust, measured cold.

What is the ignition timing for the Toyota Proace City Proace City Verso 1.2?

The ignition timing on the Toyota Proace City Proace City Verso 1.2 (2020–2026) is not adjustable.

What is the minimum brake disc thickness for the Toyota Proace City Proace City Verso 1.2?

Rear brake discs on the Toyota Proace City Proace City Verso 1.2 (2020–2026) are replaced at a minimum thickness of 10 mm.

More on the Proace City Proace City Verso