Toyota1997–2002Technical specifications

Corolla 1.8 4WD: Technical specifications

Workshop data for the 1.8-litre petrol (engine code 7A-FE). Covers engine, fluids, brakes, service, torques and air conditioning: the figures to check before a job or a parts order.

Summary

Match the engine code (7A-FE) to the vehicle before ordering parts or applying these figures.

Vehicle specifications

Overview

Make: Toyota
Model: Corolla
Years: 1997–2002
Fuel: Petrol
Engine code: 7A-FE

Performance & efficiency

Power: 81 kW (110 hp)
Engine size: 1,762 cc
Cylinders: 4 · DOHC
Compression ratio: 9.5:1
Fuel system: Toyota

Fluids & capacities

Engine oil (with the filter): 3.7 litres

All 121 specifications below

Engine & identification

Vehicle identification

No. of cylinders Type	4/DOHC
Capacity (Fiscal) cc	1762
Compression ratio :1	9,5
Suitable for unleaded petrol	Yes
Minimum octane rating RON	95
Ignition system Make	Toyota
Ignition system Type	ESA
Ignition system Description	Map-i
Trigger location	Distributor
Fuel system Make	Toyota
Fuel system Type	TCCS
Fuel system Description	MFI-i
Air metering Type	MAP
Combined ignition and fuel ECM	Yes
Diagnostic socket	Yes

Ignition system

Primary resistance
Ignition coil Make	Toyo Denso
Primary resistance Ohm	1,11-1,75
Secondary resistance Ohm	9000-15700
Secondary resistance
Distributor (ECM) Make	Toyo Denso
Distributor (ECM) No.	IIA
Contact breaker gap/trigger air gap mm	0,2-0,4

Firing order

The firing order for the Toyota Corolla 1.8 4WD (1997–2002) is 1-3-4-2.

Secondary resistance
Firing order	1-3-4-2

Valve clearances

Valve clearances for the Toyota Corolla 1.8 4WD (1997–2002) are 0,15-0,25 mm inlet and 0,25-0,35 mm exhaust, measured cold.

Valve clearance - INLET mm	0,15-0,25 cold
Valve clearance - EXHAUST mm	0,25-0,35 cold

Engine oil & fluids

Engine oil

The Toyota Corolla 1.8 4WD (1997–2002) takes 3.7 litres of engine oil with the filter.

See the reference table for the complete engine oil entries and their conditions.

Manual gearbox

The specified manual gearbox oil is SAE 75W-90, with classification GL-4/5.

Coolant

See the reference table for the complete coolant entries and their conditions.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Engine oil options
Ambient temperature range	-29°C➞10°C
Engine oil grade SAE	5W-30
Engine oil classification API/ACEA	SJ
Ambient temperature range	-18°C➞38°C
Engine oil grade SAE	10W-30
Engine oil classification API/ACEA	SJ
Ambient temperature range	-12°C➞38°C
Engine oil grade SAE	15W-40
Engine oil classification API/ACEA	SJ
Ambient temperature range	-7°C➞38°C
Engine oil grade SAE	20W-50
Engine oil classification API/ACEA	SJ
Engine with filter(s) litres	3.7
Other lubricants and capacities
Manual transmission oil grade SAE	75W-90
Manual transmission oil classification	GL-4/5
Manual transmission litres	—
Manual transmission
Automatic transmission fluid Type	Dexron II/III
Automatic transmission (drain & refill) litres	2.5
Automatic transmission (dry fill) litres	5.5
Differential oil grade - front SAE	Dexron II/III
Differential front/AT litres	1.4
Differential oil grade - rear SAE	90W
Differential oil classification - rear	GL-5
Differential rear litres	0.9
Cooling system - total capacity litres	5.5
Brake fluid Type	DOT 3
Power steering fluid Type	Dexron II/III
Power steering fluid litres	0.8

Brakes & wear limits

Brake disc thickness

Brake discs on the Toyota Corolla 1.8 4WD (1997–2002) are replaced at a minimum thickness of 20 mm (ventilated) front and 8 mm rear.

Minimum disc thickness for replacement - ventilated Front	20 mm
Minimum disc thickness for replacement Rear	8 mm
Maximum drum diameter for replacement Rear	201 mm

Brake disc and drum dimensions

Disc runout Rear	0,15 mm
Minimum pad thickness Front	1 mm
Minimum pad thickness Rear	1 mm
Minimum shoe thickness Rear	1 mm
Parking brake travel No. of notches	4-8

Service & electrical

Ignition timing

Basic ignition timing for the Toyota Corolla 1.8 4WD (1997–2002) is 10° BTDC at 750 rpm.

Ignition timing
Ignition timing - basic BTDC °Engine/rpm	10/750

Battery

The Toyota Corolla 1.8 4WD (1997–2002) uses a 12 V, 70 Ah battery.

Battery V/RC(Ah)	12 (70)

Spark plugs

The Toyota Corolla 1.8 4WD (1997–2002) uses Denso K16R-U spark plugs with a 0,8 mm electrode gap.

Spark plugs Original equipment	Denso
Spark plug Type	K16R-U
Electrode gap mm	0,8
Spark plugs Make	NGK
Spark plug Type	BKR6EYA
Electrode gap mm	0,8

Tuning and emissions

Ignition timing
Tuning conditions	—
View more information	—
Ignition advance checks °Engine/rpm	ECM Controlled
Idle speed rpm	750±50 Not adjustable
Idle speed - alternative rpm	AT=800±50 Not adjustable
Oil temperature °C	80
CO level at idle speed - tailpipe Vol. % CO	0,5 Max Not adjustable
HC level at idle speed ppm	100
CO2 level at idle speed Vol. % CO2	14,5-16
O2 level at idle speed Vol. % O2	0,1-0,5
Increased idle speed for CO test rpm	2400-2600
CO content at increased idle speed Vol. %	0,3
Lambda at increased idle λ	0,98-1,02

Service checks and adjustments

Oil pressure bar/rpm	2,9/5000

Fuel system

Engine coolant temperature (ECT) sensor Ohm/°C	200-400/80
Injector Ohm	13,4-14,2

Tightening torques

Cylinder head bolt torque

The cylinder head bolts on the Toyota Corolla 1.8 4WD (1997–2002) are tightened in 3 stages: 29 Nm, then 90°, then a final 90°.

Cylinder head
Renew bolts	No
Tighten	29 Nm
Tighten	90°
Tighten	90°

Other engine tightening torques
Cylinder head instructions	—
Main bearings Renew bolts/nuts	No
Main bearings Stage 1	30 Nm
Main bearings Stage 2	60 Nm
Big end bearings Renew bolts/nuts	No
Big end bearings Stage 1	25 Nm
Big end bearings Stage 2	90°
Oil pump to cylinder block	21 Nm
Sump bolts	8 Nm
Sump drain bolt	44 Nm
Flywheel/driveplate	78 Nm/64 Nm
Clutch pressure plate	19 Nm
Crankshaft pulley/damper centre bolt	118 Nm
Camshaft sprocket/gear	59 Nm
Camshaft carrier/cap	13 Nm
Camshaft/rocker cover	6 Nm
Inlet manifold to cylinder head	19 Nm
Exhaust manifold to cylinder head	34 Nm
Spark plugs	20 Nm
Chassis tightening torques
Front hub	216 Nm
Rear hub	226 Nm
Steering track rod end	49 Nm
Brake disc to hub Front	80 Nm
Brake caliper to carrier Front	34 Nm
Brake caliper/carrier to hub Front	88 Nm
Brake caliper to carrier Rear	27 Nm
ABS sensor Front	8 Nm
ABS sensor Rear	8 Nm
Road wheels	103 Nm

Air conditioning

No. of AC service connectors	2
Air conditioning restrictor type	Expansion valve
Compressor clutch/magnetic coupling	Yes
Compressor variable displacement solenoid	No
Air conditioning refrigerant Type	R134a
Air conditioning refrigerant quantity grams	650±50
Air conditioning oil group	PAG
Air conditioning oil Type	Dens Oil 9
Air conditioning oil quantity cm³	—

Frequently asked questions

What is the firing order of the Toyota Corolla 1.8 4WD?

The firing order for the Toyota Corolla 1.8 4WD (1997–2002) is 1-3-4-2.

What spark plugs does the Toyota Corolla 1.8 4WD use?

The Toyota Corolla 1.8 4WD (1997–2002) uses Denso K16R-U spark plugs with a 0,8 mm electrode gap.

How much oil does the Toyota Corolla 1.8 4WD take?

The Toyota Corolla 1.8 4WD (1997–2002) takes 3.7 litres of engine oil with the filter. See the reference table for the complete engine oil entries and their conditions.

What are the valve clearances for the Toyota Corolla 1.8 4WD?

Valve clearances for the Toyota Corolla 1.8 4WD (1997–2002) are 0,15-0,25 mm inlet and 0,25-0,35 mm exhaust, measured cold.

What is the cylinder head torque for the Toyota Corolla 1.8 4WD?

The cylinder head bolts on the Toyota Corolla 1.8 4WD (1997–2002) are tightened in 3 stages: 29 Nm, then 90°, then a final 90°.

What is the ignition timing for the Toyota Corolla 1.8 4WD?

Basic ignition timing for the Toyota Corolla 1.8 4WD (1997–2002) is 10° BTDC at 750 rpm.