Engine & identification
Vehicle identification
| No. of cylinders Type | 6/DOHC |
|---|---|
| Capacity (Fiscal) cc | 2995 |
| Compression ratio :1 | 10,5 |
| Suitable for unleaded petrol | Yes |
| Minimum octane rating RON | 95 |
| Ignition system Make | Bosch |
| Ignition system Description | Map-DI |
| Trigger location | Cam/Crankshaft |
| Fuel system Make | Bosch |
| Fuel system Description | MFI-s(d) |
| Air metering Type | Mass/MAP |
| Combined ignition and fuel ECM | Yes |
| Diagnostic socket | Yes |
Ignition system
| Ignition coil supply voltage + with ballast V | 12,0 |
|---|
Firing order
The firing order for the Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) is 1-5-3-6-2-4.
| Firing order | 1-5-3-6-2-4 |
|---|
Valve clearances
Valve clearances on the Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.
| Valve clearance - INLET mm | Hydraulic |
|---|---|
| Valve clearance - EXHAUST mm | Hydraulic |
Engine oil & fluids
Engine oil
The Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) takes 9.03 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-20 for all ambient temperatures, with oil specification STJLR.51.5122.
Transfer box
The transfer box has a listed capacity of 0.83 litres. The specified oil is Statoil SL12-301.
Coolant
The listed coolant type is Havoline XLC. The recorded coolant colour is Orange. The listed total cooling-system capacity is 9.13 litres.
Cooling system must be filled using vacuum filling equipment.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 0W-20 |
| Engine oil classification OEM | STJLR.51.5122 |
| Engine with filter(s) litres | 9.03 |
| Other lubricants and capacities | |
| Automatic transmission fluid Type | Shell L12108 (ZF Lifeguard 8) |
| Automatic transmission (drain & refill) litres | 6.25 |
| View more information | — |
| Filling and checking ATF level | |
| Automatic transmission (dry fill) litres | 8.3 |
| Automatic transmission - dry fill capacity | |
| Differential oil grade - front SAE | Castrol BOT 750B |
| Differential front/AT litres | 0.35-0.40 |
| Differential oil grade - rear SAE | Castrol BOT 750B |
| Rear differential oil | |
| Differential rear litres | 0.85-0.87 |
| Transfer box oil grade SAE | Statoil SL12-301 |
| Transfer box litres | 0.83 |
| Transfer box oil | |
| Coolant Type | Havoline XLC |
| Coolant Colour | Orange |
| Cooling system - total capacity litres | 9.13 |
| Cooling system must be filled using vacuum filling equipment. | |
| Brake fluid Type | DOT 4 LV |
| Brake fluid classification | ISO Class 6 |
Brakes & wear limits
Brake disc thickness
Brake discs on the Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) are replaced at a minimum thickness of 30 mm (ventilated) front and 18 mm (ventilated) rear.
| Minimum disc thickness for replacement - ventilated Front | 30 mm |
|---|---|
| Minimum disc thickness for replacement - ventilated Rear | 18 mm |
Brake disc and drum dimensions
| Disc runout Front | 0,05 mm |
|---|---|
| Disc runout Rear | 0,07 mm |
| Minimum pad thickness Front | 2 mm |
| Minimum pad thickness Rear | 2 mm |
Bar lengths use a square-root scale so small and large values stay readable.
Service & electrical
Ignition timing
The ignition timing on the Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) is not adjustable.
| Ignition timing - basic BTDC °Engine/rpm | Not adjustable |
|---|
Spark plugs
The Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) uses Bosch VAR6SIP spark plugs with a 0,7 mm electrode gap.
| Spark plugs Original equipment | Land Rover |
|---|---|
| Spark plug Type | H4P3-12405 (ACB) |
| Spark plugs Make | Bosch |
| Spark plug Type | VAR6SIP |
| Electrode gap mm | 0,7 |
| Spark plugs Make | NGK |
| Spark plug Type | SILZKAR8G7Y |
| Electrode gap mm | 0,7 |
Tuning and emissions
| Ignition advance checks °Engine/rpm | ECM Controlled |
|---|---|
| Idle speed rpm | Not adjustable |
Service checks and adjustments
| Radiator cap bar | 1,40 |
|---|---|
| Thermostat opens °C | 101 |
Fuel system
| Fuel main pump delivery pressure bar | 250 Max |
|---|
Tightening torques
| Cylinder head instructions | — | |
|---|---|---|
| Cylinder head | ||
| Renew bolts | Yes | |
| Other engine tightening torques | ||
| Big end bearings Renew bolts/nuts | Yes | |
| Big end bearings Stage 1 | 20 Nm | |
| Big end bearings Stage 2 | 125° | |
| Oil pump to cylinder block | 25 Nm | |
| Sump bolts | — | |
| View more information | — | |
| Sump bolts | ||
| Flywheel/driveplate | -/30 Nm+120° | |
| Crankshaft pulley/damper bolts | 37 Nm+90° | |
| Camshaft sprocket/gear | 25 Nm+60° | |
| Camshaft carrier/cap | — | |
| View more information | — | |
| Camshaft carrier/cap | ||
| Camshaft/rocker cover | 12 Nm | |
| Inlet manifold to cylinder head | 12 Nm | |
| Exhaust manifold to cylinder head | — | |
| Exhaust manifold to cylinder head | ||
| Water pump | 25 Nm | |
| Spark plugs | 23 Nm | |
| View more information | — | |
| Spark plugs | ||
| Fuel rail | 1)20 Nm 2)30 Nm | |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 8 Nm | |
| Camshaft position (CMP) sensor | 8 Nm | |
| Lambda sensor (Oxygen) | 48 Nm | |
| Lambda sensor (Oxygen) | ||
| Knock sensor (KS) | 20 Nm | |
| Engine oil pressure switch | 15 Nm | |
| Oil filter | 25 Nm | |
| Chassis tightening torques | ||
| Front hub | — | |
| Front hub | ||
| Front hub - wheel bearing housing bolts | — | |
| Front hub - wheel bearing housing bolts | ||
| Rear hub | — | |
| Rear hub | ||
| Steering wheel | 47 Nm | |
| Steering rack/box mounting | M10=30 Nm+60° M12=115 Nm | |
| Steering track rod end | 133 Nm | |
| Brake disc to hub Front | 35 Nm | |
| Brake caliper to carrier Front | 58 Nm | |
| Brake caliper/carrier to hub Front | 110 Nm+120° | |
| Brake disc to hub Rear | 35 Nm | |
| Brake caliper to carrier Rear | 28 Nm | |
| Brake caliper/carrier to hub Rear | 110 Nm | |
| ABS sensor Front | 9 Nm | |
| ABS sensor Rear | 9 Nm | |
| Road wheels | 1)4 Nm 2)70 Nm 3)133 Nm | |
Bar lengths use a square-root scale so small and large values stay readable.
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | Yes |
| Compressor variable displacement solenoid | Yes |
| Air conditioning refrigerant Type | — |
| Do not mix R134a with R1234yf. | |
| Air conditioning refrigerant quantity grams | 600 |
| Air conditioning oil group | PAG |
| Air conditioning oil Type | SPA2 |
| Air conditioning oil quantity cm³ | 100 |
Frequently asked questions
What is the firing order of the Land Rover Range Rover Velar 3 P400 MHEV?
The firing order for the Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) is 1-5-3-6-2-4.
What spark plugs does the Land Rover Range Rover Velar 3 P400 MHEV use?
The Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) uses Bosch VAR6SIP spark plugs with a 0,7 mm electrode gap.
How much oil does the Land Rover Range Rover Velar 3 P400 MHEV take?
The Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) takes 9.03 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-20 for all ambient temperatures, with oil specification STJLR.51.5122.
What are the valve clearances for the Land Rover Range Rover Velar 3 P400 MHEV?
Valve clearances on the Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.
What is the ignition timing for the Land Rover Range Rover Velar 3 P400 MHEV?
The ignition timing on the Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) is not adjustable.
What is the minimum brake disc thickness for the Land Rover Range Rover Velar 3 P400 MHEV?
Brake discs on the Land Rover Range Rover Velar 3 P400 MHEV (2020–2026) are replaced at a minimum thickness of 30 mm (ventilated) front and 18 mm (ventilated) rear.