Engine & identification
Vehicle identification
| No. of cylinders Type | 6/DOHC |
|---|---|
| Capacity (Fiscal) cc | 2995 |
| Compression ratio :1 | 10,5 |
| Suitable for unleaded petrol | Yes |
| Minimum octane rating RON | 95 |
| Ignition system Description | Map-DI |
| Trigger location | Cam/Crankshaft |
| Fuel system Description | MFI-s(d) |
| Air metering Type | Mass/MAP |
| Combined ignition and fuel ECM | Yes |
| Diagnostic socket | Yes |
Ignition system
| Ignition coil supply voltage + with ballast V | 12,0 |
|---|
Firing order
The firing order for the Land Rover Range Rover Velar 3.0 P380 (2017–2018) is 1-4-2-5-3-6.
| Firing order | 1-4-2-5-3-6 |
|---|
Valve clearances
Valve clearances for the Land Rover Range Rover Velar 3.0 P380 (2017–2018) are 0,18-0,22 mm inlet and 0,23-0,27 mm exhaust, measured cold.
| Valve clearance - INLET mm | 0,18-0,22 cold |
|---|---|
| Valve clearance - EXHAUST mm | 0,23-0,27 cold |
Engine oil & fluids
Engine oil
The Land Rover Range Rover Velar 3.0 P380 (2017–2018) takes 6.5 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-20 for all ambient temperatures, with oil specification STJLR.51.5122.
Transfer box
The transfer box has a listed capacity of 0.83 litres. The specified oil is Statoil SL12-301.
Coolant
The listed coolant type is WSS-M97B44-D. The recorded coolant colour is Pink/Violet. The listed total cooling-system capacity is 13.5 litres.
Cooling system must be filled using vacuum filling equipment.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 0W-20 |
| Engine oil classification OEM | STJLR.51.5122 |
| Engine with filter(s) litres | 6.5 |
| View more information | — |
| Other lubricants and capacities | |
| Automatic transmission fluid Type | Shell L12108 (ZF Lifeguard 8) |
| Automatic transmission (drain & refill) litres | — |
| View more information | — |
| Filling and checking ATF level | |
| Automatic transmission (dry fill) litres | 8.5 |
| Automatic transmission - dry fill capacity | |
| Differential oil grade - front SAE | Castrol BOT 750B |
| Differential front/AT litres | 0.35-0.40 |
| Differential oil grade - rear SAE | Castrol BOT 750B |
| Rear differential oil | |
| Differential rear litres | 0.85-0.87 |
| Transfer box oil grade SAE | Statoil SL12-301 |
| Transfer box litres | 0.83 |
| Transfer box oil | |
| Coolant Type | WSS-M97B44-D |
| Coolant Colour | Pink/Violet |
| Cooling system - total capacity litres | 13.5 |
| Cooling system must be filled using vacuum filling equipment. | |
| Brake fluid Type | DOT 4 LV |
| Brake fluid classification | ISO Class 6 |
Brakes & wear limits
Brake disc thickness
Brake discs on the Land Rover Range Rover Velar 3.0 P380 (2017–2018) are replaced at a minimum thickness of 30 mm (ventilated) front and 18 mm (ventilated) rear.
| Minimum disc thickness for replacement - ventilated Front | 30 mm |
|---|---|
| Minimum disc thickness for replacement - ventilated Rear | 18 mm |
Brake disc and drum dimensions
| Minimum pad thickness Front | 3 mm |
|---|---|
| Minimum pad thickness Rear | 3 mm |
Service & electrical
Ignition timing
The ignition timing on the Land Rover Range Rover Velar 3.0 P380 (2017–2018) is not adjustable.
| Ignition timing - basic BTDC °Engine/rpm | Not adjustable |
|---|
Tuning and emissions
| Ignition advance checks °Engine/rpm | ECM Controlled |
|---|---|
| Idle speed rpm | Not adjustable |
Service checks and adjustments
| Radiator cap bar | 1,40 |
|---|---|
| Thermostat opens °C | 82 |
Fuel system
| Fuel main pump delivery pressure bar | 200 Max |
|---|
Spark plugs
| Spark plugs Original equipment | NGK |
|---|---|
| Spark plug Type | SILZKAR7C10S |
| Electrode gap mm | 0,9-1,0 |
Tightening torques
| Cylinder head instructions | — |
|---|---|
| Cylinder head | |
| Renew bolts | Yes |
| Other engine tightening torques | |
| Oil pump to cylinder block | 25 Nm |
| Sump bolts | — |
| View more information | — |
| Assemble components within 7 minutes. | |
| Sump drain bolt | 24 Nm |
| Flywheel/driveplate | -/45 Nm+90° |
| Crankshaft pulley/damper centre bolt | 200 Nm+270° |
| View more information | — |
| Crankshaft pulley/damper centre bolt | |
| Crankshaft pulley/damper bolts | 65 Nm |
| Crankshaft pulley/damper bolts | |
| Camshaft sprocket/gear | 32 Nm |
| Camshaft carrier/cap | 1)3 Nm 2)12 Nm |
| Camshaft/rocker cover | 13 Nm |
| View more information | — |
| Assemble components within 7 minutes. | |
| Inlet manifold to cylinder head | 25 Nm |
| Exhaust manifold to cylinder head | 1)10 Nm 2)18 Nm |
| Water pump | 12 Nm |
| Spark plugs | 23 Nm |
| View more information | — |
| Spark plugs | |
| Fuel rail | 1)20 Nm 2)30 Nm |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 10 Nm |
| Camshaft position (CMP) sensor | 10 Nm |
| Lambda sensor (Oxygen) | 48 Nm |
| Lambda sensor (Oxygen) | |
| Knock sensor (KS) | 20 Nm |
| Oil filter | 25 Nm |
| Chassis tightening torques | |
| Front hub | — |
| Front hub | |
| Front hub - wheel bearing housing bolts | — |
| Front hub - wheel bearing housing bolts | |
| Rear hub | — |
| Rear hub | |
| Steering wheel | 47 Nm |
| Steering rack/box mounting | M10=30 Nm+60° M12=115 Nm |
| Steering track rod end | 133 Nm |
| Brake disc to hub Front | 35 Nm |
| Brake caliper to carrier Front | 58 Nm |
| Brake caliper/carrier to hub Front | 110 Nm+120° |
| Brake disc to hub Rear | 35 Nm |
| Brake caliper to carrier Rear | 28 Nm |
| Brake caliper/carrier to hub Rear | 110 Nm |
| ABS sensor Front | 9 Nm |
| ABS sensor Rear | 9 Nm |
| Road wheels | 1)4 Nm 2)70 Nm 3)133 Nm |
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | Yes |
| Compressor variable displacement solenoid | Yes |
| Air conditioning refrigerant Type | — |
| Do not mix R134a with R1234yf. | |
| Air conditioning refrigerant quantity grams | 550 |
| Air conditioning oil group | PAG |
| Air conditioning oil Type | SPA2 |
| Air conditioning oil quantity cm³ | 80 |
Frequently asked questions
What is the firing order of the Land Rover Range Rover Velar 3.0 P380?
The firing order for the Land Rover Range Rover Velar 3.0 P380 (2017–2018) is 1-4-2-5-3-6.
How much oil does the Land Rover Range Rover Velar 3.0 P380 take?
The Land Rover Range Rover Velar 3.0 P380 (2017–2018) takes 6.5 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-20 for all ambient temperatures, with oil specification STJLR.51.5122.
What are the valve clearances for the Land Rover Range Rover Velar 3.0 P380?
Valve clearances for the Land Rover Range Rover Velar 3.0 P380 (2017–2018) are 0,18-0,22 mm inlet and 0,23-0,27 mm exhaust, measured cold.
What is the ignition timing for the Land Rover Range Rover Velar 3.0 P380?
The ignition timing on the Land Rover Range Rover Velar 3.0 P380 (2017–2018) is not adjustable.
What is the minimum brake disc thickness for the Land Rover Range Rover Velar 3.0 P380?
Brake discs on the Land Rover Range Rover Velar 3.0 P380 (2017–2018) are replaced at a minimum thickness of 30 mm (ventilated) front and 18 mm (ventilated) rear.