Engine & identification
Vehicle identification
| No. of cylinders Type | 6/DOHC |
|---|---|
| Capacity cc | 2993 |
| Compression ratio :1 | 16,1 |
| Fuel system Make | Bosch |
| Fuel system Type | EDC 17CP |
Injection system
| Air metering Type | Mass/MAP |
|---|---|
| Pump type | Common rail |
Injection sequence
The injection sequence for the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) is 1-4-2-5-3-6.
| Injection sequence | 1-4-2-5-3-6 |
|---|
Valve clearances
Valve clearances on the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) are hydraulic — they self-adjust, so no manual clearance figure applies.
| Valve clearance - INLET mm | Hydraulic |
|---|---|
| Valve clearance - EXHAUST mm | Hydraulic |
Engine oil & fluids
Engine oil
The Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) takes 5.9 litres of engine oil with the filter. The specified engine oil grade is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C934-B.
Transfer box
The transfer box has a listed capacity of 1.5 litres. The specified oil is Shell TF 0753 Synthetic.
Coolant
The listed coolant type is WSS-M97B44. The recorded coolant colour is Orange. The listed total cooling-system capacity is 11.5 litres.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 5W-30 Synthetic |
| Engine oil classification OEM | WSS-M2C934-B |
| Engine with filter(s) litres | 5.9 |
| View more information | — |
| Other lubricants and capacities | |
| Automatic transmission fluid Type | Shell M-1375.4 |
| Automatic transmission (dry fill) litres | 9,9 4x4=8,5 |
| View more information | — |
| Differential oil grade - front SAE | 75W-90 Castrol SAF-XO Synthetic |
| Differential front/AT litres | 0.6 |
| Differential oil grade - rear SAE | 75W-90 Castrol SAF-XO Synthetic |
| Differential rear litres | — |
| Differential oil - rear | |
| Transfer box oil grade SAE | Shell TF 0753 Synthetic |
| Transfer box litres | 1.5 |
| Coolant Type | WSS-M97B44 |
| Coolant Colour | Orange |
| Cooling system - total capacity litres | 11.5 |
| Brake fluid Type | DOT 4 |
| Power steering fluid Type | Texaco PSF 33270 |
Brakes & wear limits
Brake disc thickness
Brake discs on the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) are replaced at a minimum thickness of 27 mm (ventilated) front and 18 mm rear.
| Minimum disc thickness for replacement - ventilated Front | 27 mm |
|---|---|
| Minimum disc thickness for replacement Rear | 18 mm |
Brake disc and drum dimensions
| Disc thickness variation Front | 0,010 mm |
|---|---|
| Disc thickness variation Rear | 0,010 mm |
| Disc runout Front | 0,05 mm |
| Disc runout Rear | 0,09 mm |
| Minimum pad thickness Rear | 3 mm |
| Minimum shoe thickness Rear | 2 mm |
Service & electrical
Glow plugs
Glow plugs for the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013): Original equipment Bosch and Bosch 0 250 603 005.
| Glow plug - part no. Original equipment | Bosch |
|---|---|
| Glow plug - part no. Bosch | 0 250 603 005 |
Tuning and emissions
| Idle speed rpm | 650±150 |
|---|---|
| Rated no load speed rpm | 4700-4900 |
| Oil temperature °C | 80 |
| Idle speed - for smoke test rpm | 500-800 |
| Governed speed range - for smoke test rpm | 4800-5100 |
| Maximum time at governed speed secs | 3,0 |
| Test mode A/B | B |
| Probe type 1/2 | 1 |
| Smoke opacity - EU limit m-1 (%) | 1,50 (48) |
| Smoke opacity - homologation value m-1 (%) | 0,51 (19) |
Tightening torques
Cylinder head bolt torque
The cylinder head bolts on the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) are tightened in 5 stages: 20 Nm, then 40 Nm, then 80 Nm, then 90°, then a final 90°.
| Cylinder head | |
|---|---|
| Renew bolts | Yes |
| Tighten | 20 Nm |
| Tighten | 40 Nm |
| Tighten | 80 Nm |
| Tighten | 90° |
| Tighten | 90° |
| Cylinder head instructions | — |
|---|---|
| Other engine tightening torques | |
| Oil pump to cylinder block | 10 Nm |
| Sump bolts | 10 Nm M8=23 Nm |
| Sump drain bolt | 23 Nm |
| Flywheel/driveplate | 50 Nm+45°+45° |
| Crankshaft pulley/damper centre bolt | — |
| Crankshaft pulley/damper bolts | 25 Nm |
| Camshaft sprocket/gear | — |
| View more information | — |
| Camshaft carrier/cap | — |
| View more information | — |
| Camshaft/rocker cover | 10 Nm |
| Water pump | 10 Nm |
| Injector/clamp | 9 Nm |
| Injector pipe unions | 1)15 Nm 2)35 Nm |
| Fuel/injection pump sprocket/gear | 50 Nm |
| Glow plugs | 11 Nm |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 5 Nm |
| Camshaft position (CMP) sensor | 10 Nm |
| Engine oil pressure switch | 14 Nm |
| Oil filter | 28 Nm |
| Chassis tightening torques | |
| Front hub | 230 Nm |
| Front hub - wheel bearing housing bolts | 115 Nm |
| Rear hub | 350 Nm |
| Brake disc to hub Front | 35 Nm |
| Brake caliper to carrier Front | 35 Nm |
| Brake caliper/carrier to hub Front | 275 Nm |
| Brake disc to hub Rear | 35 Nm |
| Brake caliper to carrier Rear | 35 Nm |
| Brake caliper/carrier to hub Rear | 115 Nm |
| ABS sensor Front | 9 Nm |
| ABS sensor Rear | 9 Nm |
| Road wheels | 140 Nm |
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | No |
| Compressor variable displacement solenoid | Yes |
| Air conditioning refrigerant Type | R134a |
| Air conditioning refrigerant quantity grams | 600±25 |
| Air conditioning oil group | PAG |
| Air conditioning oil Type | SP10 |
| Air conditioning oil quantity cm³ | 110 |
| Air conditioning oil viscosity ISO | 46 |
Frequently asked questions
What is the injection sequence of the Land Rover Range Rover Sport 3.0 TDV6?
The injection sequence for the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) is 1-4-2-5-3-6.
What glow plugs does the Land Rover Range Rover Sport 3.0 TDV6 use?
Glow plugs for the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013): Original equipment Bosch and Bosch 0 250 603 005.
How much oil does the Land Rover Range Rover Sport 3.0 TDV6 take?
The Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) takes 5.9 litres of engine oil with the filter. The specified engine oil grade is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C934-B.
What are the valve clearances for the Land Rover Range Rover Sport 3.0 TDV6?
Valve clearances on the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) are hydraulic — they self-adjust, so no manual clearance figure applies.
What is the cylinder head torque for the Land Rover Range Rover Sport 3.0 TDV6?
The cylinder head bolts on the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) are tightened in 5 stages: 20 Nm, then 40 Nm, then 80 Nm, then 90°, then a final 90°.
What is the minimum brake disc thickness for the Land Rover Range Rover Sport 3.0 TDV6?
Brake discs on the Land Rover Range Rover Sport 3.0 TDV6 (2011–2013) are replaced at a minimum thickness of 27 mm (ventilated) front and 18 mm rear.