Land Rover   ·   2005–2009

Range Rover Sport 2.7 TDV6: Technical specifications

Technical specifications (2005–2009)

The Land Rover Range Rover Sport (L320) 2.7 TDV6 is the 2.7-litre diesel variant, engine code 276DT, built from 2005 to 2009. Quick answers and key figures below, then the full workshop tables.

Engine code276DT
Power147 kW (200 hp)@ 4000 rpm
FuelDiesel
Cylinders6
Oil capacity5,5litres · with the filter

Engine & identification

Vehicle identification

No. of cylinders Type6/DOHC
Capacity cc2720
Compression ratio :117,3
Fuel system MakeSiemens
Fuel system TypePDC 2

Injection system

Air metering TypeMass
Fuel/injection pump assembly MakeSiemens
Pump typeCommon rail
Fuel main pump delivery pressure bar1650
Fuel feed/lift pump delivery pressure bar0,5
Injector nozzle MakeSiemens
Engine coolant temperature (ECT) sensor Ohm/°C7,5/60

Injection sequence

The injection sequence for the Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) is 1-4-2-5-3-6.

Injection sequence1-4-2-5-3-6

Valve clearances

Valve clearances on the Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) are hydraulic — they self-adjust, so no manual clearance figure applies.

Valve clearance - INLET mmHydraulic
Valve clearance - EXHAUST mmHydraulic

Engine oil & fluids

Engine oil

The Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) takes 5.5 litres of engine oil with the filter. The specified engine oil grade is SAE 5W-30 for all ambient temperatures, with oil specification WSS-M2C913-B and API/ACEA classification /B1/B3.

Transfer box

See the reference table for the complete transfer box entries and their conditions.

Coolant

See the reference table for the complete coolant entries and their conditions.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Engine oil options
Ambient temperature range All temperatures
Engine oil grade SAE 5W-30
Engine oil classification OEM WSS-M2C913-B
Engine oil classification API/ACEA /B1/B3
Engine with filter(s) litres 5.5
Other lubricants and capacities
Automatic transmission fluid Type Shell M-1375.4
Automatic transmission (drain & refill) litres 3.5-4.0
Checking level
Automatic transmission (dry fill) litres 9.5
Differential oil grade - front SAE 75W-90 Castrol SAF-XO Synthetic
Differential front/AT litres 0.6
Differential oil grade - rear SAE 75W-90 Castrol SAF-XO Synthetic
Differential rear litres 1.1
Transfer box oil grade SAE Shell TF 0753 Synthetic
Transfer box litres 1.5
Cooling system - total capacity litres 9.4
Brake fluid Type DOT 4
Power steering fluid Type Texaco PSF 33270

Brakes & wear limits

Brake disc thickness

Brake discs on the Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) are replaced at a minimum thickness of 27 mm (ventilated) front and 17 mm rear.

Minimum disc thickness for replacement - ventilated Front27 mm
Minimum disc thickness for replacement Rear17 mm

Brake disc and drum dimensions

Disc thickness variation Rear0,010 mm
Disc runout Front0,05 mm
Disc runout Rear0,09 mm
Minimum pad thickness Front3 mm
Minimum pad thickness Rear3 mm
Minimum shoe thickness Rear2 mm

Bar lengths use a square-root scale so small and large values stay readable.

Service & electrical

Tuning and emissions

Maximum time at governed speed secs2,0
Test mode A/BB
Probe type 1/21
Smoke opacity - EU limit m-1 (%)3,00 (73)

Starting and charging

Battery V/RC(Ah)12

Service checks and adjustments

Oil pressure bar/rpm1,9/3500
Radiator cap bar1,10
Thermostat opens °C88

Tightening torques

Cylinder head bolt torque

The cylinder head bolts on the Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) are tightened in 4 stages: 20 Nm, then 40 Nm, then 80 Nm, then a final 180°.

Cylinder head
Renew boltsYes
Tighten20 Nm
Tighten40 Nm
Tighten80 Nm
Tighten180°
Cylinder head instructions
Other engine tightening torques
Oil pump to cylinder block10 Nm
Sump bolts10 Nm
Sump drain bolt23 Nm
Flywheel/driveplate50 Nm+45°+45°
Crankshaft pulley/damper centre bolt100 Nm+90°
Crankshaft pulley/damper bolts14 Nm
Camshaft sprocket/gear23 Nm
Camshaft carrier/cap10 Nm
Camshaft/rocker cover10 Nm
Inlet manifold to cylinder head23 Nm
Exhaust manifold to cylinder head23 Nm
Water pump10 Nm
Injector/clamp10 Nm
Injector pipe unions1)15 Nm 2)30 Nm
Fuel/injection pump sprocket/gear50 Nm
Fuel/injection pump mounting23 Nm
Glow plugs11 Nm
Crankshaft position (CKP) sensor/engine speed (RPM) sensor5 Nm
Camshaft position (CMP) sensor10 Nm
Knock sensor (KS)20 Nm
Engine oil pressure switch15 Nm
Oil filter25 Nm
Chassis tightening torques
Front hub230 Nm
Front hub - wheel bearing housing bolts115 Nm
Rear hub350 Nm
Steering wheel63 Nm
Steering rack/box mounting175 Nm
Steering track rod end76 Nm M14=150 Nm
Brake disc to hub Front35 Nm
Brake caliper to carrier Front35 Nm
Brake caliper/carrier to hub Front275 Nm
Brake disc to hub Rear35 Nm
Brake caliper to carrier Rear35 Nm
Brake caliper/carrier to hub Rear115 Nm
Back plate to hub Rear9 Nm
ABS sensor Front10 Nm
ABS sensor Rear9 Nm
Road wheels140 Nm

Bar lengths use a square-root scale so small and large values stay readable.

Air conditioning

No. of AC service connectors2
Air conditioning restrictor typeExpansion valve
Compressor clutch/magnetic couplingNo
Compressor variable displacement solenoidYes
Air conditioning refrigerant TypeR134a
Air conditioning refrigerant quantity grams550
Air conditioning oil groupPAG
Air conditioning oil TypeDens Oil 8
Air conditioning oil quantity cm³130
Air conditioning oil viscosity ISO46

Frequently asked questions

What is the injection sequence of the Land Rover Range Rover Sport 2.7 TDV6?

The injection sequence for the Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) is 1-4-2-5-3-6.

How much oil does the Land Rover Range Rover Sport 2.7 TDV6 take?

The Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) takes 5.5 litres of engine oil with the filter. The specified engine oil grade is SAE 5W-30 for all ambient temperatures, with oil specification WSS-M2C913-B and API/ACEA classification /B1/B3.

What are the valve clearances for the Land Rover Range Rover Sport 2.7 TDV6?

Valve clearances on the Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) are hydraulic — they self-adjust, so no manual clearance figure applies.

What is the cylinder head torque for the Land Rover Range Rover Sport 2.7 TDV6?

The cylinder head bolts on the Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) are tightened in 4 stages: 20 Nm, then 40 Nm, then 80 Nm, then a final 180°.

What is the minimum brake disc thickness for the Land Rover Range Rover Sport 2.7 TDV6?

Brake discs on the Land Rover Range Rover Sport 2.7 TDV6 (2005–2009) are replaced at a minimum thickness of 27 mm (ventilated) front and 17 mm rear.