Engine & identification
Vehicle identification
| No. of cylinders Type | 4/DOHC |
|---|---|
| Capacity (Fiscal) cc | 1997 |
| Compression ratio :1 | 10,5 |
| Suitable for unleaded petrol | Yes |
| Minimum octane rating RON | 91 |
| Ignition system Make | Bosch |
| Ignition system Description | Map-DI |
| Trigger location | Cam/Crankshaft |
| Fuel system Make | Bosch |
| Fuel system Description | MFI-s(d) |
| Air metering Type | Mass/MAP |
| Combined ignition and fuel ECM | Yes |
| Diagnostic socket | Yes |
Ignition system
| Ignition coil Make | Land Rover |
|---|---|
| Ignition coil Type | LR091616 |
| Ignition coil supply voltage + with ballast V | 12,0 |
Firing order
The firing order for the Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) is 1-3-4-2.
| Firing order | 1-3-4-2 |
|---|
Valve clearances
Valve clearances on the Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.
| Valve clearance - INLET mm | Hydraulic |
|---|---|
| Valve clearance - EXHAUST mm | Hydraulic |
Engine oil & fluids
Engine oil
The Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) takes 7.02 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-20 for all ambient temperatures, with oil specification STJLR.03.5006.
Transfer box
The transfer box has a listed capacity of 0.4 litres.
See the reference table for the complete transfer box entries and their conditions.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 0W-20 |
| Engine oil classification OEM | STJLR.03.5006 |
| Engine with filter(s) litres | 7.02 |
| Other lubricants and capacities | |
| Automatic transmission fluid Type | Shell L12108 (ZF Lifeguard 8) |
| Automatic transmission (drain & refill) litres | — |
| Filling transmission and checking ATF level | |
| Automatic transmission (dry fill) litres | 6.5 |
| Automatic transmission - dry fill capacity | |
| Differential oil grade - rear SAE | 75W-80 Castrol BOT 799 |
| Differential rear litres | 0.8 |
| Rear differential oil | |
| Transfer box oil grade SAE | 75W-90 Castrol BOT 750 PLUS |
| Transfer box litres | 0.4 |
| Transfer box oil | |
| Brake fluid Type | DOT 4 LV |
| Brake fluid classification | ISO Class 6 |
Brakes & wear limits
Brake disc thickness
Rear brake discs on the Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) are replaced at a minimum thickness of 8 mm or 18 mm (ventilated).
| Minimum disc thickness for replacement - ventilated Front | — |
|---|---|
| Minimum disc thickness for replacement - ventilated front | |
| Minimum disc thickness for replacement Rear | 8 mm |
| Minimum disc thickness for replacement - ventilated Rear | 18 mm |
Brake disc and drum dimensions
| Minimum disc thickness for replacement - ventilated front | ||
|---|---|---|
| Minimum pad thickness Front | 3 mm | |
| Minimum pad thickness Rear | 3 mm | |
Bar lengths use a square-root scale so small and large values stay readable.
Service & electrical
Ignition timing
The ignition timing on the Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) is not adjustable.
| Ignition timing - basic BTDC °Engine/rpm | Not adjustable |
|---|
Spark plugs
The Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) uses Bosch 0 242 140 566 spark plugs with a 0,7 mm electrode gap.
| Spark plugs Original equipment | Land Rover |
|---|---|
| Spark plug Type | H4P3-12405 (ACA) |
| Electrode gap mm | 0,60-0,65 |
| Spark plugs Make | Bosch |
| Spark plug Type | 0 242 140 566 |
| Electrode gap mm | 0,7 |
| Spark plugs Make | NGK |
| Spark plug Type | SILZKAR8G7Y |
| Electrode gap mm | 0,7 |
Tuning and emissions
| Ignition advance checks °Engine/rpm | ECM Controlled |
|---|---|
| Idle speed rpm | Not adjustable |
| CO level at idle speed - tailpipe Vol. % CO | Not adjustable |
Starting and charging
| Battery V/RC(Ah) | 12 |
|---|
Fuel system
| Fuel main pump delivery pressure bar | 200 Max |
|---|
Tightening torques
| Cylinder head instructions | — | |
|---|---|---|
| Cylinder head | ||
| Renew bolts | Yes | |
| Other engine tightening torques | ||
| Main bearings Renew bolts/nuts | Yes | |
| Main bearings Stage 1 | — | |
| Main bearings | ||
| Big end bearings Renew bolts/nuts | Yes | |
| Big end bearings Stage 1 | 20 Nm | |
| Big end bearings Stage 2 | 125° | |
| Oil pump to cylinder block | 25 Nm | |
| Sump bolts | — | |
| View more information | — | |
| Assemble components and tighten bolts within 7 minutes. | ||
| Sump drain bolt | 25 Nm | |
| Flywheel/driveplate | -/30 Nm+120° | |
| Crankshaft pulley/damper bolts | 37 Nm+90° | |
| Camshaft sprocket/gear | 25 Nm+60° | |
| Camshaft carrier/cap | — | |
| View more information | — | |
| If new cylinder head fitted, use tool No. 303-1444-02. If re-using cylinder head, use tool No. 303-1444-01. | ||
| Inlet manifold to cylinder head | 12 Nm | |
| Exhaust manifold to cylinder head | 1)10 Nm 2)25 Nm | |
| Exhaust downpipe to manifold | 18 Nm | |
| Water pump | 1)6 Nm 2)12 Nm | |
| Spark plugs | 23 Nm | |
| View more information | — | |
| Spark plugs | ||
| Fuel rail | 1)20 Nm 2)30 Nm | |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 8 Nm | |
| Camshaft position (CMP) sensor | 8 Nm | |
| Lambda sensor (Oxygen) | 48 Nm | |
| Knock sensor (KS) | 20 Nm | |
| Oil filter | 28 Nm | |
| Chassis tightening torques | ||
| Front hub | — | |
| Front/rear hub | ||
| Rear hub | — | |
| Steering wheel | 47 Nm | |
| Steering rack/box mounting | 30 Nm+60° | |
| Steering track rod end | 133 Nm | |
| Brake disc to hub Front | 10 Nm | |
| Brake caliper to carrier Front | 58 Nm | |
| Brake caliper to carrier | ||
| Brake caliper/carrier to hub Front | 110 Nm+120° | |
| Brake disc to hub Rear | 10 Nm | |
| Brake caliper to carrier Rear | 30 Nm | |
| Brake caliper/carrier to hub Rear | 110 Nm | |
| Back plate to hub Rear | 10 Nm | |
| ABS sensor Front | 9 Nm | |
| ABS sensor Rear | 9 Nm | |
| Road wheels | 1)4 Nm 2)70 Nm 3)133 Nm | |
Bar lengths use a square-root scale so small and large values stay readable.
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | Yes |
| Compressor variable displacement solenoid | Yes |
| Air conditioning refrigerant Type | — |
| Do not mix R134a with R1234yf. | |
| Air conditioning refrigerant quantity grams | 525±10 |
| Air conditioning oil group | PAG |
| Air conditioning oil Type | SPA2 |
| Air conditioning oil quantity cm³ | 110 |
Frequently asked questions
What is the firing order of the Land Rover Range Rover Evoque 2 P200 MHEV?
The firing order for the Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) is 1-3-4-2.
What spark plugs does the Land Rover Range Rover Evoque 2 P200 MHEV use?
The Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) uses Bosch 0 242 140 566 spark plugs with a 0,7 mm electrode gap.
How much oil does the Land Rover Range Rover Evoque 2 P200 MHEV take?
The Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) takes 7.02 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-20 for all ambient temperatures, with oil specification STJLR.03.5006.
What are the valve clearances for the Land Rover Range Rover Evoque 2 P200 MHEV?
Valve clearances on the Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.
What is the ignition timing for the Land Rover Range Rover Evoque 2 P200 MHEV?
The ignition timing on the Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) is not adjustable.
What is the minimum brake disc thickness for the Land Rover Range Rover Evoque 2 P200 MHEV?
Rear brake discs on the Land Rover Range Rover Evoque 2 P200 MHEV (2019–2026) are replaced at a minimum thickness of 8 mm or 18 mm (ventilated).