Engine & identification
Vehicle identification
| No. of cylinders Type | 4/DOHC |
|---|---|
| Capacity cc | 1999 |
| Compression ratio :1 | 15,5 |
| Fuel system Make | Bosch |
Injection system
| Air metering Type | Mass/MAP |
|---|---|
| Pump type | Common rail |
| Fuel main pump delivery pressure bar | 2200 Max |
Injection sequence
The injection sequence for the Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021) is 1-3-4-2.
| Injection sequence | 1-3-4-2 |
|---|
Valve clearances
Valve clearances on the Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021) are hydraulic — they self-adjust, so no manual clearance figure applies.
| Valve clearance - INLET mm | Hydraulic |
|---|---|
| Valve clearance - EXHAUST mm | Hydraulic |
Engine oil & fluids
Engine oil
The Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021) takes 7.02 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-30 for all ambient temperatures, with oil specification STJLR.03.5007 and API/ACEA classification /C2.
Transfer box
The transfer box has a listed capacity of 0.4 litres.
See the reference table for the complete transfer box entries and their conditions.
Coolant
The listed coolant type is Havoline XLC. The recorded coolant colour is Orange. The listed total cooling-system capacity is 11.5 litres.
Cooling system must be filled using vacuum filling equipment.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 0W-30 |
| Engine oil classification OEM | STJLR.03.5007 |
| Engine oil classification API/ACEA | /C2 |
| Engine with filter(s) litres | 7.02 |
| Other lubricants and capacities | |
| Automatic transmission fluid Type | Shell L12108/ZF Lifeguard 8 |
| Automatic transmission (drain & refill) litres | — |
| Filling transmission and checking ATF level | |
| Automatic transmission (dry fill) litres | 6.5 |
| Automatic transmission - dry-fill capacity | |
| Differential oil grade - rear SAE | 75W-80 Castrol BOT 799 |
| Differential rear litres | 0.8 |
| Rear differential oil | |
| Transfer box oil grade SAE | 75W-90 Castrol BOT 750 PLUS |
| Transfer box litres | 0.4 |
| Transfer box oil | |
| Coolant Type | Havoline XLC |
| Coolant Colour | Orange |
| Cooling system - total capacity litres | 11.5 |
| Cooling system must be filled using vacuum filling equipment. | |
| Brake fluid Type | DOT 4 LV |
| Brake fluid classification | ISO Class 6 |
| Selective catalytic reduction (SCR) additive Type | AdBlue (AUS 32) |
| Selective catalytic reduction (SCR) additive litres | 14.5 |
Brakes & wear limits
Brake disc thickness
Rear brake discs on the Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021) are replaced at a minimum thickness of 8 mm or 18 mm (ventilated).
| Minimum disc thickness for replacement - ventilated Front | — |
|---|---|
| Minimum disc thickness - front | |
| Minimum disc thickness for replacement Rear | 8 mm |
| Minimum disc thickness for replacement - ventilated Rear | 18 mm |
Brake disc and drum dimensions
| Minimum disc thickness - front | ||
|---|---|---|
| Minimum pad thickness Front | 3 mm | |
| Minimum pad thickness Rear | 3 mm | |
Bar lengths use a square-root scale so small and large values stay readable.
Service & electrical
Glow plugs
Glow plugs for the Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021): Original equipment LR128419 and NGK CZ552.
| Glow plug - part no. Original equipment | LR128419 |
|---|---|
| Glow plug - part no. NGK | CZ552 |
Starting and charging
| Battery V/RC(Ah) | 12 |
|---|
Service checks and adjustments
| Oil pressure bar/rpm | 1,4/1750 |
|---|
Tightening torques
| Cylinder head instructions | — | |
|---|---|---|
| View more information | — | |
| Cylinder head | ||
| Renew bolts | Yes | |
| Other engine tightening torques | ||
| Main bearings Renew bolts/nuts | Yes | |
| Main bearings Stage 1 | — | |
| Big end bearings Renew bolts/nuts | Yes | |
| Big end bearings Stage 1 | 20 Nm | |
| Big end bearings Stage 2 | 125° | |
| Oil pump to cylinder block | 25 Nm | |
| Sump bolts | — | |
| View more information | — | |
| Assemble components within 7 minutes. | ||
| Sump drain bolt | 23 Nm | |
| Flywheel/driveplate | -/30 Nm+120° | |
| Crankshaft pulley/damper bolts | 37 Nm+90° | |
| Camshaft sprocket/gear | — | |
| Camshaft sprocket/gear | ||
| Camshaft carrier/cap | — | |
| View more information | — | |
| Camshaft carrier/cap/rocker cover | ||
| Inlet manifold to cylinder head | 12 Nm | |
| Exhaust manifold to cylinder head | 1)15 Nm 2)30 Nm | |
| Water pump | 1)6 Nm 2)12 Nm | |
| Injector/clamp | 11 Nm+165° | |
| Injector pipe unions | 10 Nm+65° | |
| Fuel/injection pump sprocket/gear | 80 Nm | |
| Fuel/injection pump mounting | 25 Nm | |
| Glow plugs | 17 Nm | |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 8 Nm | |
| Camshaft position (CMP) sensor | 8 Nm | |
| Nitrogen oxide (NOx) sensor | 48 Nm | |
| Nitrogen oxide (NOx) sensor | ||
| Engine oil pressure switch | 15 Nm | |
| Oil filter | 28 Nm | |
| Chassis tightening torques | ||
| Front hub | — | |
| Front/rear hub | ||
| Rear hub | — | |
| Steering wheel | 47 Nm | |
| Steering rack/box mounting | 30 Nm+60° | |
| Steering track rod end | 133 Nm | |
| Brake disc to hub Front | 10 Nm | |
| Brake caliper to carrier Front | 58 Nm | |
| Brake caliper/carrier to hub Front | 110 Nm+120° | |
| Brake disc to hub Rear | 10 Nm | |
| Brake caliper to carrier Rear | 30 Nm | |
| Brake caliper/carrier to hub Rear | 110 Nm | |
| Back plate to hub Rear | 10 Nm | |
| ABS sensor Front | 9 Nm | |
| ABS sensor Rear | 9 Nm | |
| Road wheels | 1)4 Nm 2)70 Nm 3)133 Nm | |
Bar lengths use a square-root scale so small and large values stay readable.
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | Yes |
| Compressor variable displacement solenoid | Yes |
| Air conditioning refrigerant Type | — |
| Do not mix R134a with R1234yf. | |
| Air conditioning refrigerant quantity grams | 525±10 |
| Air conditioning oil group | PAG |
| Air conditioning oil Type | SPA2 |
| Air conditioning oil quantity cm³ | 110 |
Frequently asked questions
What is the injection sequence of the Land Rover Range Rover Evoque 2 D240 MHEV?
The injection sequence for the Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021) is 1-3-4-2.
What glow plugs does the Land Rover Range Rover Evoque 2 D240 MHEV use?
Glow plugs for the Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021): Original equipment LR128419 and NGK CZ552.
How much oil does the Land Rover Range Rover Evoque 2 D240 MHEV take?
The Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021) takes 7.02 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-30 for all ambient temperatures, with oil specification STJLR.03.5007 and API/ACEA classification /C2.
What are the valve clearances for the Land Rover Range Rover Evoque 2 D240 MHEV?
Valve clearances on the Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021) are hydraulic — they self-adjust, so no manual clearance figure applies.
What is the minimum brake disc thickness for the Land Rover Range Rover Evoque 2 D240 MHEV?
Rear brake discs on the Land Rover Range Rover Evoque 2 D240 MHEV (2019–2021) are replaced at a minimum thickness of 8 mm or 18 mm (ventilated).