Engine & identification
Vehicle identification
| No. of cylinders Type | 4/DOHC |
|---|---|
| Capacity cc | 2179 |
| Compression ratio :1 | 15,8 |
| Fuel system Make | Bosch |
| Fuel system Type | EDC 17 |
Injection system
| Air metering Type | Mass/MAP |
|---|---|
| Fuel/injection pump assembly Make | Bosch |
| Pump type | Common rail |
| Fuel main pump delivery pressure bar | 1600 |
| Injector nozzle Make | Bosch |
Injection sequence
The injection sequence for the Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) is 1-3-4-2.
| Injection sequence | 1-3-4-2 |
|---|
Valve clearances
Valve clearances on the Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) are hydraulic — they self-adjust, so no manual clearance figure applies.
| Valve clearance - INLET mm | Hydraulic |
|---|---|
| Valve clearance - EXHAUST mm | Hydraulic |
Engine oil & fluids
Engine oil
The Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) takes 5.9 litres of engine oil with the filter.
A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C934-B.
A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification STJLR.03.5005.
A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C913-C.
A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification STJLR.03.5003.
Manual gearbox
The manual gearbox has a listed capacity of 1.9 litres. The specified oil is Castrol BOT 350M3.
Transfer box
See the reference table for the complete transfer box entries and their conditions.
Coolant
The listed coolant type is Texaco XLC. The recorded coolant colour is Orange. The listed total cooling-system capacity is 8.5 litres.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 5W-30 Synthetic |
| Engine oil classification OEM | WSS-M2C934-B |
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 5W-30 Synthetic |
| Engine oil classification OEM | STJLR.03.5005 |
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 5W-30 Synthetic |
| Engine oil classification OEM | WSS-M2C913-C |
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 5W-30 Synthetic |
| Engine oil classification OEM | STJLR.03.5003 |
| Engine with filter(s) litres | 5.9 |
| Other lubricants and capacities | |
| Manual transmission oil grade SAE | Castrol BOT 350M3 |
| Manual transmission litres | 1.9 |
| Automatic transmission fluid Type | 6sp (AWF21)=Nippon AW-1 9sp (9HP48)=Shell L12108/ZF Lifeguard 8 |
| Automatic transmission (drain & refill) litres | — |
| 9HP48 (9 speed) | |
| Automatic transmission (dry fill) litres | 6sp (AWF21)=7,0 9sp (9HP48)=6,5 |
| Automatic transmission - dry-fill capacity | |
| Differential oil grade - rear SAE | — |
| With Active Driveline | |
| Differential rear litres | — |
| View more information | — |
| Transfer box oil grade SAE | 75W-90 BOT 448 Plus |
| Transfer box litres | 0.45 |
| Transfer box | |
| Coolant Type | Texaco XLC |
| Coolant Colour | Orange |
| Cooling system - total capacity litres | 8.5 |
| Brake fluid Type | DOT 4 ESL |
| Brake fluid classification | LRES22BF03 |
| Clutch fluid Type | DOT 4 ESL |
| Clutch fluid classification | LRES22BF03 |
Brakes & wear limits
Brake disc thickness
Brake discs on the Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) are replaced at a minimum thickness of 26 mm (ventilated) front and 9 mm rear.
| Minimum disc thickness for replacement - ventilated Front | 26 mm |
|---|---|
| Minimum disc thickness for replacement Rear | 9 mm |
Brake disc and drum dimensions
| Minimum pad thickness Front | 2 mm |
|---|
Bar lengths use a square-root scale so small and large values stay readable.
Service & electrical
Service checks and adjustments
| Oil pressure bar/rpm | 1,6/1750 Min |
|---|---|
| Radiator cap bar | 1,45 |
| Thermostat opens °C | 83-90 |
Tightening torques
Cylinder head bolt torque
The cylinder head bolts on the Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) are tightened in 3 stages: 20 Nm, then 60 Nm, then a final 220°.
| Cylinder head | |
|---|---|
| Renew bolts | Yes |
| Tighten | 20 Nm |
| Tighten | 60 Nm |
| Tighten | 220° |
| Cylinder head instructions | — | |
|---|---|---|
| Other engine tightening torques | ||
| Oil pump to cylinder block | 1)7 Nm 2)9 Nm | |
| Sump bolts | — | |
| View more information | — | |
| Lower sump | ||
| Sump drain bolt | 20 Nm | |
| Flywheel/driveplate | 33 Nm+34° | |
| Clutch pressure plate | 29 Nm | |
| Crankshaft pulley/damper centre bolt | 70 Nm+82° | |
| View more information | — | |
| Wait 1 hour before starting engine to allow sealant to dry. | ||
| Camshaft sprocket/gear | 20 Nm+60° | |
| Camshaft carrier/cap | 1)5 Nm 2)11 Nm | |
| View more information | — | |
| Camshaft/rocker cover | 1)5 Nm 2)9 Nm | |
| Inlet manifold to cylinder head | 9 Nm | |
| Exhaust manifold to cylinder head | 20 Nm | |
| Injector/clamp | 5 Nm+130° | |
| Injector pipe unions | 1)22 Nm 2)25 Nm | |
| Fuel/injection pump mounting | 22 Nm | |
| Glow plugs | 10 Nm | |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 8 Nm | |
| Camshaft position (CMP) sensor | 6 Nm | |
| Oil filter | 25 Nm | |
| Chassis tightening torques | ||
| Front hub | — | |
| Front/rear hub | ||
| Rear hub | — | |
| Steering wheel | 47 Nm | |
| Steering rack/box mounting | 60 Nm+60° | |
| Steering track rod end | 133 Nm | |
| Brake disc to hub Front | 35 Nm | |
| Brake caliper to carrier Front | 28 Nm | |
| Brake caliper/carrier to hub Front | 200 Nm | |
| Brake disc to hub Rear | 35 Nm | |
| Brake caliper to carrier Rear | 35 Nm | |
| Brake caliper/carrier to hub Rear | 110 Nm | |
| ABS sensor Front | 5 Nm | |
| ABS sensor Rear | 9 Nm | |
| Road wheels | 1)4 Nm 2)70 Nm 3)133 Nm | |
Bar lengths use a square-root scale so small and large values stay readable.
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | Yes |
| Compressor variable displacement solenoid | Yes |
| Air conditioning refrigerant Type | R134a/R1234yf |
| Do not mix R134a with R1234yf. | |
| Air conditioning refrigerant quantity grams | 650±10 |
| Air conditioning oil group | PAG |
| Air conditioning oil Type | SPA2 |
| Air conditioning oil quantity cm³ | 80 |
Frequently asked questions
What is the injection sequence of the Land Rover Range Rover Evoque 2.2 TD4?
The injection sequence for the Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) is 1-3-4-2.
How much oil does the Land Rover Range Rover Evoque 2.2 TD4 take?
The Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) takes 5.9 litres of engine oil with the filter. A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C934-B. A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification STJLR.03.5005. A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification WSS-M2C913-C. A listed engine oil option is SAE 5W-30 synthetic for all ambient temperatures, with oil specification STJLR.03.5003.
What are the valve clearances for the Land Rover Range Rover Evoque 2.2 TD4?
Valve clearances on the Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) are hydraulic — they self-adjust, so no manual clearance figure applies.
What is the cylinder head torque for the Land Rover Range Rover Evoque 2.2 TD4?
The cylinder head bolts on the Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) are tightened in 3 stages: 20 Nm, then 60 Nm, then a final 220°.
What is the minimum brake disc thickness for the Land Rover Range Rover Evoque 2.2 TD4?
Brake discs on the Land Rover Range Rover Evoque 2.2 TD4 (2011–2015) are replaced at a minimum thickness of 26 mm (ventilated) front and 9 mm rear.