Engine & identification
Vehicle identification
| No. of cylinders Type | 4/DOHC |
|---|---|
| Capacity cc | 1999 |
| Compression ratio :1 | 16,5 |
Injection system
| Air metering Type | Mass/MAP |
|---|---|
| Pump type | Common rail |
Injection sequence
The injection sequence for the Land Rover Discovery Sport 2 D200 MHEV (2020–2026) is 1-3-4-2.
| Injection sequence | 1-3-4-2 |
|---|
Valve clearances
Valve clearances on the Land Rover Discovery Sport 2 D200 MHEV (2020–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.
| Valve clearance - INLET mm | Hydraulic |
|---|---|
| Valve clearance - EXHAUST mm | Hydraulic |
Engine oil & fluids
Engine oil
The Land Rover Discovery Sport 2 D200 MHEV (2020–2026) takes 6.5 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-30 for all ambient temperatures, with oil specification STJLR.03.5007.
Coolant
The listed coolant type is Havoline XLC. The recorded coolant colour is Orange. The listed total cooling-system capacity is 11.3 litres.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 0W-30 |
| Engine oil classification OEM | STJLR.03.5007 |
| Engine with filter(s) litres | 6.5 |
| Other lubricants and capacities | |
| Automatic transmission fluid Type | Shell L12108 (ZF Lifeguard 8) |
| Automatic transmission (drain & refill) litres | 6.5 |
| Automatic transmission - drain and refill | |
| Automatic transmission (dry fill) litres | 6.5 |
| Automatic transmission - dry-fill capacity | |
| Differential oil grade - rear SAE | Castrol BOT 799 |
| Differential rear litres | 0.8 |
| Differential oil - rear | |
| Coolant Type | Havoline XLC |
| Coolant Colour | Orange |
| Cooling system - total capacity litres | 11.3 |
| Brake fluid Type | DOT 4 |
| Brake fluid classification | LR052653 |
| Selective catalytic reduction (SCR) additive Type | AdBlue (AUS 32/ARLA 32) |
| Selective catalytic reduction (SCR) additive litres | 17 |
Brakes & wear limits
Brake disc thickness
Rear brake discs on the Land Rover Discovery Sport 2 D200 MHEV (2020–2026) are replaced at a minimum thickness of 8 mm or 18 mm (ventilated).
| Minimum disc thickness for replacement - ventilated Front | — |
|---|---|
| Minimum disc thickness - front | |
| Minimum disc thickness for replacement Rear | 8 mm |
| Minimum disc thickness for replacement - ventilated Rear | 18 mm |
Brake disc and drum dimensions
| Minimum disc thickness - front | ||
|---|---|---|
| Minimum pad thickness Front | 3 mm | |
| Minimum pad thickness Rear | 3 mm | |
Bar lengths use a square-root scale so small and large values stay readable.
Service & electrical
Service checks and adjustments
| Oil pressure bar/rpm | 2,45/1750 Min |
|---|---|
| Oil pressure | |
| Radiator cap bar | 1,45 |
| Thermostat opens °C | 90-100 |
Tightening torques
Cylinder head bolt torque
The cylinder head bolts on the Land Rover Discovery Sport 2 D200 MHEV (2020–2026) are tightened in 6 stages: 20 Nm, then 53 Nm, then slacken off 180°, then 53 Nm, then 90°, then a final 120°.
| Cylinder head | |
|---|---|
| Renew bolts | Yes |
| Tighten | 20 Nm |
| Tighten | 53 Nm |
| Slacken off | 180° |
| Tighten | 53 Nm |
| Tighten | 90° |
| Tighten | 120° |
| Cylinder head instructions | — | |
|---|---|---|
| Other engine tightening torques | ||
| Sump bolts | — | |
| View more information | — | |
| Assemble components and tighten bolts within 7 minutes. | ||
| Flywheel/driveplate | -/30 Nm+120° | |
| Crankshaft pulley/damper bolts | 37 Nm+90° | |
| Camshaft sprocket/gear | 80 Nm+90° | |
| Camshaft carrier/cap | — | |
| View more information | — | |
| Lubricate the components with clean engine oil. | ||
| Camshaft/rocker cover | 12 Nm | |
| View more information | — | |
| Camshaft/rocker cover | ||
| Inlet manifold to cylinder head | 11 Nm | |
| Exhaust manifold to cylinder head | 15 Nm | |
| Water pump | 1)6 Nm 2)12 Nm | |
| Injector/clamp | 11 Nm+165° | |
| Injector pipe unions | 10 Nm+65° | |
| Fuel/injection pump sprocket/gear | 80 Nm | |
| Fuel/injection pump mounting | 25 Nm | |
| Glow plugs | 18 Nm | |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 8 Nm | |
| Camshaft position (CMP) sensor | 8 Nm | |
| Nitrogen oxide (NOx) sensor | 60 Nm | |
| Engine oil pressure switch | 15 Nm | |
| Oil filter | 28 Nm | |
| Chassis tightening torques | ||
| Front hub | — | |
| Front/rear hub | ||
| Rear hub | — | |
| Steering wheel | 47 Nm | |
| Steering rack/box mounting | 30 Nm+60° | |
| Steering track rod end | 133 Nm | |
| Brake disc to hub Front | 10 Nm | |
| Brake caliper to carrier Front | 58 Nm | |
| Brake caliper/carrier to hub Front | 110 Nm+120° | |
| Brake disc to hub Rear | 10 Nm | |
| Brake caliper to carrier Rear | 30 Nm | |
| Brake caliper/carrier to hub Rear | 110 Nm | |
| ABS sensor Front | 9 Nm | |
| ABS sensor Rear | 9 Nm | |
| Road wheels | 1)70 Nm 2)133 Nm | |
Bar lengths use a square-root scale so small and large values stay readable.
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | Yes |
| Compressor variable displacement solenoid | No |
| Air conditioning refrigerant Type | — |
| Do not mix R134a with R1234yf. | |
| Air conditioning refrigerant quantity grams | 525±10 |
| Air conditioning oil group | PAG |
| Air conditioning oil Type | SPA2 |
| Air conditioning oil quantity cm³ | 110 |
Frequently asked questions
What is the injection sequence of the Land Rover Discovery Sport 2 D200 MHEV?
The injection sequence for the Land Rover Discovery Sport 2 D200 MHEV (2020–2026) is 1-3-4-2.
How much oil does the Land Rover Discovery Sport 2 D200 MHEV take?
The Land Rover Discovery Sport 2 D200 MHEV (2020–2026) takes 6.5 litres of engine oil with the filter. The specified engine oil grade is SAE 0W-30 for all ambient temperatures, with oil specification STJLR.03.5007.
What are the valve clearances for the Land Rover Discovery Sport 2 D200 MHEV?
Valve clearances on the Land Rover Discovery Sport 2 D200 MHEV (2020–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.
What is the cylinder head torque for the Land Rover Discovery Sport 2 D200 MHEV?
The cylinder head bolts on the Land Rover Discovery Sport 2 D200 MHEV (2020–2026) are tightened in 6 stages: 20 Nm, then 53 Nm, then slacken off 180°, then 53 Nm, then 90°, then a final 120°.
What is the minimum brake disc thickness for the Land Rover Discovery Sport 2 D200 MHEV?
Rear brake discs on the Land Rover Discovery Sport 2 D200 MHEV (2020–2026) are replaced at a minimum thickness of 8 mm or 18 mm (ventilated).