Honda2010Technical specifications

Civic 2.0 Type R Mugen 200: Technical specifications

Workshop data for the 2-litre petrol (engine code K20Z4). Covers engine, fluids, brakes, service, torques and air conditioning: the figures to check before a job or a parts order.

Common faults & fixes

Summary

Match the engine code (K20Z4) to the vehicle before ordering parts or applying these figures.

Vehicle specifications

Overview

Make
Honda
Model
Civic
Years
2010
Fuel
Petrol
Engine code
K20Z4

Performance & efficiency

Power
148 kW (201 hp)
Engine size
1,998 cc
Cylinders
4 · DOHC
Compression ratio
9.7:1
Fuel system
Honda

Fluids & capacities

Engine oil (with the filter)
4.4 litres
All 92 specifications below

Engine & identification

Vehicle identification

No. of cylinders Type4/DOHC
Capacity (Fiscal) cc1998
Compression ratio :19,7
Suitable for unleaded petrolYes
Minimum octane rating RON95
Ignition system MakeHonda
Ignition system TypePGM-FI
Ignition system DescriptionMap-DI
Trigger locationCam/Crankshaft
Fuel system MakeHonda
Fuel system TypePGM-FI
Fuel system DescriptionMFI-s
Air metering TypeMAP
Combined ignition and fuel ECMYes
Diagnostic socketYes

Ignition system

Ignition coil supply voltage + with ballast V12,0

Firing order

The firing order for the Honda Civic 2.0 Type R Mugen 200 (2010) is 1-3-4-2.

Firing order1-3-4-2

Valve clearances

Valve clearances for the Honda Civic 2.0 Type R Mugen 200 (2010) are 0,21-0,25 mm inlet and 0,25-0,29 mm exhaust, measured cold.

Valve clearance - INLET mm0,21-0,25 cold
Valve clearance - EXHAUST mm0,25-0,29 cold

Engine oil & fluids

Engine oil

The Honda Civic 2.0 Type R Mugen 200 (2010) takes 4.4 litres of engine oil with the filter.

See the reference table for the complete engine oil entries and their conditions.

Manual gearbox

The manual gearbox has a listed capacity of 1.9 litres.

See the reference table for the complete manual gearbox entries and their conditions.

Coolant

The listed total cooling-system capacity is 4.4 litres.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Engine oil options
Ambient temperature range All temperatures
Engine oil grade SAE 0W-30, 0W-40 Synthetic
Engine oil classification API/ACEA SL/A1, A3, A5
Ambient temperature range All temperatures
Engine oil grade SAE 5W-30, 5W-40 Synthetic
Engine oil classification API/ACEA SL/A1, A3, A5
Ambient temperature range -20°C➞
Engine oil grade SAE 10W-30, 10W-40 Synthetic
Engine oil classification API/ACEA SL/A1, A3, A5
Engine with filter(s) litres 4.4
Other lubricants and capacities
Manual transmission oil grade SAE Honda MTF
Manual transmission litres 1.9
Cooling system - total capacity litres 4.4
Brake fluid Type DOT 4

Brakes & wear limits

Brake disc thickness

Brake discs on the Honda Civic 2.0 Type R Mugen 200 (2010) are replaced at a minimum thickness of 23 mm (ventilated) front and 8 mm rear.

Minimum disc thickness for replacement - ventilated Front23 mm
Minimum disc thickness for replacement Rear8 mm

Brake disc and drum dimensions

Disc thickness variation Front0,015 mm
Disc thickness variation Rear0,015 mm
Disc runout Front0,04 mm
Disc runout Rear0,04 mm
Minimum pad thickness Front1,6 mm
Minimum pad thickness Rear1,6 mm
Parking brake travel No. of notches6-7

Service & electrical

Tuning and emissions

Ignition timing - basic BTDC °Engine/rpm8±2/750 Not adjustable
Ignition advance checks °Engine/rpmECM Controlled
Idle speed rpm750±50 Not adjustable
Oil temperature °C80
CO level at idle speed - tailpipe Vol. % CO0,1 Max Not adjustable
HC level at idle speed ppm100
CO2 level at idle speed Vol. % CO214,5-16
O2 level at idle speed Vol. % O20,1-0,5
Increased idle speed for CO test rpm2250-2750
CO content at increased idle speed Vol. %0,2
Lambda at increased idle λ0,97-1,03

Starting and charging

Battery V/RC(Ah)12

Service checks and adjustments

Compression pressure bar9,3 Min
Oil pressure bar/rpm3,0/3000
Radiator cap bar0,93-1,23
Thermostat opens °C76-80

Fuel system

System pressure bar3,3-3,8

Spark plugs

Spark plugs Original equipmentDenso
Spark plug TypeSK22PR-M11S
Electrode gap mm1,0-1,1
Spark plugs MakeNGK
Spark plug TypeIFR7G11KS
Electrode gap mm1,0-1,1

Tightening torques

Cylinder head instructions—
View more information—
Other engine tightening torques
Sump drain bolt39 Nm
Flywheel/driveplate122 Nm
Clutch pressure plate25 Nm
Crankshaft pulley/damper centre bolt49 Nm+90°
Spark plugs25 Nm
Oil filter12 Nm
Chassis tightening torques
Front hub245 Nm
Rear hub181 Nm
Steering wheel39 Nm
Steering rack/box mounting59 Nm
Brake disc to hub Front10 Nm
Brake caliper to carrier Front33 Nm
Brake caliper/carrier to hub Front108 Nm
Brake disc to hub Rear10 Nm
Brake caliper to carrier Rear35 Nm
Brake caliper/carrier to hub Rear55 Nm
Road wheels108 Nm

Air conditioning

No. of AC service connectors2
Air conditioning restrictor typeExpansion valve
Compressor clutch/magnetic couplingYes
Compressor variable displacement solenoidNo
Air conditioning refrigerant TypeR134a
Air conditioning refrigerant quantity grams425±25
Air conditioning oil groupPAG
Air conditioning oil TypeSP10
Air conditioning oil quantity cm³155±5
Air conditioning oil viscosity ISO46

Frequently asked questions

What is the firing order of the Honda Civic 2.0 Type R Mugen 200?

The firing order for the Honda Civic 2.0 Type R Mugen 200 (2010) is 1-3-4-2.

How much oil does the Honda Civic 2.0 Type R Mugen 200 take?

The Honda Civic 2.0 Type R Mugen 200 (2010) takes 4.4 litres of engine oil with the filter. See the reference table for the complete engine oil entries and their conditions.

What are the valve clearances for the Honda Civic 2.0 Type R Mugen 200?

Valve clearances for the Honda Civic 2.0 Type R Mugen 200 (2010) are 0,21-0,25 mm inlet and 0,25-0,29 mm exhaust, measured cold.

What is the minimum brake disc thickness for the Honda Civic 2.0 Type R Mugen 200?

Brake discs on the Honda Civic 2.0 Type R Mugen 200 (2010) are replaced at a minimum thickness of 23 mm (ventilated) front and 8 mm rear.

More on the Civic