Body & trim
1 documented fault — symptoms, causes and workshop fixes.
Warning message 'Pre-Collision System Unavailable' displayed in instrument panel
Front view camera control module software fault. Fix: re-program with updated software.
Overview
- Affects
- All models with front view camera.
- Remedy
- Software update
Symptoms
Trouble code stored in front view camera control module fault memory: C1A94.
Repair steps
- Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
- If no fault(s) found: Re-program front view camera control module with upgraded software.
- Erase any stored trouble codes. Note: To carry out an effective repair a software upgrade will be required - refer to manufacturer.
Data: Motorwise Workshop. Bulletin 1.
Glossary
Technical terms used in this guide.
- Trouble Codes
- Standardised fault codes stored by the engine control module, read with a diagnostic tool
- Control Module
- A control unit for one of the vehicle's systems (engine, gearbox, brakes, body, and so on)
- Fault Memory
- The list of stored trouble codes in a control module
- Re-Program
- Update the software on a control module using the manufacturer's diagnostic tool
- Trouble Code
- A standardised fault code stored by a control module, read with a diagnostic tool
Frequently asked questions
What are the common faults with the Toyota Yaris 1.0 VVTi?
This guide contains one workshop bulletin for the Toyota Yaris 1.0 VVTi. Of these, one concerns the body and trim. Symptoms, causes, repair steps and part numbers are shown where supplied.
Does every Toyota Yaris 1.0 VVTi have these faults?
No. These are patterns documented across the model by workshops, not predictions for an individual vehicle. Where a fault applies only to certain vehicles or VIN ranges, that is listed with the fault.
Can I check for Toyota Yaris 1.0 VVTi faults myself?
Many of them. The documented symptoms can be seen, heard or felt during a test drive.