Engine & fuel system
1 documented fault — symptoms, causes and workshop fixes.
Engine malfunction indicator lamp (MIL) illuminated. Trouble code stored: P0341
Incorrect calibration of camshaft position (CMP) sensor due to software mapping fault. Fix: re-program with updated software.
Overview
- Affects
- All models with 2.0 Diesel engine.
- Fault codes
P0341- Remedy
- Software update
Repair steps
- Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
- If no fault(s) found: Re-program engine control module (ECM) with upgraded software. Note: To carry out an effective repair a software upgrade will be required - refer to manufacturer.
- Erase any stored trouble codes.
Data: Motorwise Workshop. Bulletin 3.
Electrical & ignition
1 documented fault — symptoms, causes and workshop fixes.
Front interior lamp illuminates by itself
Chafing within front interior lamp assembly causing short circuit. Fix: clean and lubricate.
Overview
- Affects
- All models.
- Remedy
- Clean & lubricate
Repair steps
- Remove front interior lamp assembly.
- Carefully disassemble front interior lamp assembly.
- Thoroughly clean electrical contact terminals.
- Fit a rubber sleeve to each electrical contact terminal ensuring 2 - 3 mm clearance at base.
- Reassemble front interior lamp assembly and refit.
Parts
| Part | Part number | Qty |
|---|---|---|
| Rubber sleeve kit | LR060212 | 1 |
Data: Motorwise Workshop. Bulletin 1.
Air conditioning & heating
1 documented fault — symptoms, causes and workshop fixes.
Incorrect display of outside air temperature
Overview
- Affects
- All models, 2017→.
- Remedy
- Software update
Cause
AC/heater blower motor control module software fault.
Repair
- Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
- If no fault(s) found: Re-program AC control module with upgraded software. Note: To carry out an effective repair a software upgrade will be required - refer to manufacturer.
Data: Motorwise Workshop. Bulletin 2.
Glossary
Technical terms used in this guide.
- ECM
- Engine control module — the electronic unit that manages the engine
- Trouble Codes
- Standardised fault codes stored by the engine control module, read with a diagnostic tool
- AC
- Air conditioning — the system that cools the cabin
- CMP
- Camshaft position — a sensor that tells the engine control module where the camshaft is
- AC/Heater
- The heating and air-conditioning system
- Control Module
- A control unit for one of the vehicle's systems (engine, gearbox, brakes, body, and so on)
- Re-Program
- Update the software on a control module using the manufacturer's diagnostic tool
- Blower Motor
- The fan that pushes air through the heater and air-conditioning
- Calibration
- Setting a sensor or module so its readings match the real world
Frequently asked questions
What are the common faults with the Land Rover Range Rover Evoque Convertible 2.0 SD4?
This guide contains three workshop bulletins for the Land Rover Range Rover Evoque Convertible 2.0 SD4. Of these, one concerns the engine and fuel system and one the electrical and ignition. Symptoms, causes, repair steps and part numbers are shown where supplied.
Does every Land Rover Range Rover Evoque Convertible 2.0 SD4 have these faults?
No. These are patterns documented across the model by workshops, not predictions for an individual vehicle. Where a fault applies only to certain vehicles or VIN ranges, that is listed with the fault.
Can I check for Land Rover Range Rover Evoque Convertible 2.0 SD4 faults myself?
Many of them. The documented symptoms can be seen, heard or felt during a test drive.