Engine & identification
Vehicle identification
| No. of cylinders Type | 6/DOHC |
|---|---|
| Capacity (Fiscal) cc | 2998 |
| Compression ratio :1 | 11,0 |
| Suitable for unleaded petrol | Yes |
| Minimum octane rating RON | 95 |
| Ignition system Description | Map-DI |
| Trigger location | Cam/Crankshaft |
| Fuel system Description | MFI-s(d) |
| Air metering Type | Mass/MAP |
| Combined ignition and fuel ECM | Yes |
| Diagnostic socket | Yes |
Ignition system
| Ignition coil Make | Eldor |
|---|---|
| Ignition coil Type | 77850002 |
| Ignition coil supply voltage + with ballast V | 12,0 |
Firing order
The firing order for the Toyota GR Supra 3.0 Manual (2022–2026) is 1-5-3-6-2-4.
| Firing order | 1-5-3-6-2-4 |
|---|
Valve clearances
Valve clearances on the Toyota GR Supra 3.0 Manual (2022–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.
| Valve clearance - INLET mm | Hydraulic |
|---|---|
| Valve clearance - EXHAUST mm | Hydraulic |
Engine oil & fluids
Engine oil
The Toyota GR Supra 3.0 Manual (2022–2026) takes 6.5 litres of engine oil with the filter.
See the reference table for the complete engine oil entries and their conditions.
Manual gearbox
The manual gearbox has a listed capacity of 1.2 litres.
See the reference table for the complete manual gearbox entries and their conditions.
Coolant
See the reference table for the complete coolant entries and their conditions.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 0W-20 Synthetic |
| Engine oil classification OEM | BMW LL-17 FE+ |
| Engine oil classification API/ACEA | SN/C5 |
| Engine with filter(s) litres | 6.5 |
| View more information | — |
| Other lubricants and capacities | |
| Manual transmission oil grade SAE | MTF-LT-5 Synthetic |
| Manual transmission litres | 1.2 |
| Differential oil grade - rear SAE | Synthetic |
| Differential oil grade - rear | |
| Differential rear litres | 0,8 LSD=1,0 |
| Rear differential oil | |
| Coolant Type | Frostox HT12 |
| Cooling system - total capacity litres | — |
| View more information | — |
| Do not depress brake pedal. | |
| Brake fluid Type | DOT 4 LV |
Brakes & wear limits
Brake disc thickness
Brake discs on the Toyota GR Supra 3.0 Manual (2022–2026) are replaced at a minimum thickness of 22,4 mm (ventilated) front and 18,4 mm (ventilated) rear.
| Minimum disc thickness for replacement - ventilated Front | 22,4 mm |
|---|---|
| Minimum disc thickness for replacement - front | |
| Minimum disc thickness for replacement - ventilated Rear | 18,4 mm |
Brake disc and drum dimensions
| Minimum disc thickness | |
|---|---|
| Minimum pad thickness Front | 1 mm |
| Minimum pad thickness Rear | 1 mm |
Service & electrical
Ignition timing
The ignition timing on the Toyota GR Supra 3.0 Manual (2022–2026) is not adjustable.
| Ignition timing - basic BTDC °Engine/rpm | Not adjustable |
|---|
Tuning and emissions
| Ignition advance checks °Engine/rpm | ECM Controlled |
|---|---|
| CO level at idle speed - tailpipe Vol. % CO | Not adjustable |
Starting and charging
| Battery V/RC(Ah) | 12 (90-92) |
|---|---|
| Alternator output A/V/rpm | 180/12/- |
Service checks and adjustments
| Compression pressure bar | 9,0 Min |
|---|---|
| Radiator cap bar | 1,40 |
Fuel system
| Fuel main pump delivery pressure bar | 350 Max |
|---|
Spark plugs
| Spark plugs Original equipment | NGK |
|---|---|
| Spark plug Type | SILZKGR8E8S |
| Spark plugs Make | Beru |
| Spark plug Type | 12ZR5MIP2L |
| Electrode gap mm | 0,73-0,74 |
| Spark plugs Make | Champion |
| Spark plug Type | RERX4ZWYPD1 |
| Electrode gap mm | 0,73-0,74 |
Tightening torques
Cylinder head bolt torque
The cylinder head bolts on the Toyota GR Supra 3.0 Manual (2022–2026) are tightened in 4 stages: 30 Nm, then 90°, then 90°, then a final 90°.
| Cylinder head | |
|---|---|
| Renew bolts | Yes |
| Tighten | 30 Nm |
| Tighten | 90° |
| Tighten | 90° |
| Tighten | 90° |
| Tighten | M8=19 Nm |
| Cylinder head instructions | — |
|---|---|
| Other engine tightening torques | |
| Main bearings Renew bolts/nuts | Yes |
| Main bearings Stage 1 | — |
| View more information | — |
| Main bearings | |
| Big end bearings Renew bolts/nuts | Yes |
| Big end bearings Stage 1 | 20 Nm |
| Big end bearings Stage 2 | 70°+70° |
| Oil pump to cylinder block | 15 Nm+45° |
| Sump bolts | 24 Nm |
| View more information | — |
| Assemble components and tighten bolts within 12 minutes. | |
| Sump drain bolt | 25 Nm |
| Flywheel/driveplate | 45 Nm+45°/- |
| Clutch pressure plate | 15 Nm+90° |
| Crankshaft pulley/damper bolts | 40 Nm+120° |
| Camshaft sprocket/gear | 1)10 Nm 2)30 Nm 3)50 Nm+35° |
| Camshaft carrier/cap | M6 8.8=1)10 Nm 2)10 Nm, M6 10.9=1)12 Nm 2)12 Nm |
| Camshaft/rocker cover | 1)8 Nm 2)11 Nm |
| View more information | — |
| Camshaft/rocker cover | |
| Inlet manifold to cylinder head | 10 Nm |
| Exhaust manifold to cylinder head | — |
| Exhaust manifold to cylinder head | |
| Exhaust downpipe to manifold | 19 Nm |
| Water pump | 10 Nm |
| Spark plugs | 23 Nm |
| Fuel rail | — |
| View more information | — |
| Fuel rail | |
| Crankshaft position (CKP) sensor/engine speed (RPM) sensor | 5 Nm |
| Camshaft position (CMP) sensor | 4 Nm |
| Engine coolant temperature (ECT) sensor | 14 Nm |
| Lambda sensor (Oxygen) | 50 Nm |
| Knock sensor (KS) | 22 Nm |
| Engine oil pressure switch | 15 Nm |
| Oil filter | 25 Nm |
| Chassis tightening torques | |
| Front hub - wheel bearing housing bolts | 120 Nm+90° |
| Rear hub | 210 Nm+90° |
| Rear hub - wheel bearing housing bolts | 120 Nm+90° |
| Steering wheel | 63 Nm |
| Steering rack/box mounting | — |
| Steering rack/box fixing | |
| Steering track rod end | 165 Nm |
| Brake disc to hub Front | 16 Nm |
| Brake caliper to carrier Front | 35 Nm |
| Only applies to single piston caliper. | |
| Brake caliper/carrier to hub Front | 80 Nm |
| Brake disc to hub Rear | 16 Nm |
| Brake caliper to carrier Rear | 35 Nm |
| Brake caliper/carrier to hub Rear | 130 Nm |
| Back plate to hub Rear | 8 Nm |
| ABS sensor Front | 12 Nm |
| ABS wheel speed sensor | |
| ABS sensor Rear | 12 Nm |
| Road wheels | 140 Nm |
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | Yes |
| Compressor variable displacement solenoid | Yes |
| Air conditioning refrigerant Type | — |
| Do not mix R134a with R1234yf. | |
| Air conditioning refrigerant quantity grams | 550 |
Frequently asked questions
What is the firing order of the Toyota GR Supra 3.0 Manual?
The firing order for the Toyota GR Supra 3.0 Manual (2022–2026) is 1-5-3-6-2-4.
How much oil does the Toyota GR Supra 3.0 Manual take?
The Toyota GR Supra 3.0 Manual (2022–2026) takes 6.5 litres of engine oil with the filter. See the reference table for the complete engine oil entries and their conditions.
What are the valve clearances for the Toyota GR Supra 3.0 Manual?
Valve clearances on the Toyota GR Supra 3.0 Manual (2022–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.
What is the cylinder head torque for the Toyota GR Supra 3.0 Manual?
The cylinder head bolts on the Toyota GR Supra 3.0 Manual (2022–2026) are tightened in 4 stages: 30 Nm, then 90°, then 90°, then a final 90°.
What is the ignition timing for the Toyota GR Supra 3.0 Manual?
The ignition timing on the Toyota GR Supra 3.0 Manual (2022–2026) is not adjustable.
What is the minimum brake disc thickness for the Toyota GR Supra 3.0 Manual?
Brake discs on the Toyota GR Supra 3.0 Manual (2022–2026) are replaced at a minimum thickness of 22,4 mm (ventilated) front and 18,4 mm (ventilated) rear.