Engine & identification
Vehicle identification
| No. of cylinders Type | 4/DOHC |
|---|---|
| Capacity cc | 1585 |
| Compression ratio :1 | 16,5 |
Injection system
| Air metering Type | Mass |
|---|---|
| Pump type | Common rail |
| Fuel feed/lift pump delivery pressure bar | 4,5-7,0 |
Injection sequence
The injection sequence for the Toyota Auris 1.6 D-4D (2015–2018) is 1-3-4-2.
| Injection sequence | 1-3-4-2 |
|---|
Valve clearances
Valve clearances on the Toyota Auris 1.6 D-4D (2015–2018) are hydraulic — they self-adjust, so no manual clearance figure applies.
| Valve clearance - INLET mm | Hydraulic |
|---|---|
| Valve clearance - EXHAUST mm | Hydraulic |
Engine oil & fluids
Engine oil
The Toyota Auris 1.6 D-4D (2015–2018) takes 5.2 litres of engine oil with the filter. The specified engine oil grade is SAE 5W-30 synthetic for all ambient temperatures, with API/ACEA classification /C3.
Manual gearbox
The manual gearbox has a listed capacity of 2.1 litres. The specified oil is SAE 75W, with classification GL-4.
Coolant
The listed total cooling-system capacity is 7.0 litres.
See the reference table for the complete coolant entries and their conditions.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | All temperatures |
| Engine oil grade SAE | 5W-30 Synthetic |
| Engine oil classification API/ACEA | /C3 |
| Engine with filter(s) litres | 5.2 |
| Other lubricants and capacities | |
| Manual transmission oil grade SAE | 75W |
| Manual transmission oil classification | GL-4 |
| Manual transmission litres | 2.1 |
| Coolant Type | Toyota premium long life |
| Cooling system - total capacity litres | 7.0 |
| Brake fluid Type | DOT 4 |
Brakes & wear limits
Brake disc and drum dimensions
| Disc runout Front | 0,05 mm |
|---|---|
| Minimum pad thickness Front | 1 mm |
| Parking brake travel No. of notches | 5-8 |
Service & electrical
Tuning and emissions
| Idle speed rpm | 830±50 |
|---|
Service checks and adjustments
| Oil pressure bar/rpm | — |
|---|
Tightening torques
| Cylinder head instructions | — |
|---|---|
| Cylinder head | |
| Renew bolts | Yes |
| Other engine tightening torques | |
| Sump drain bolt | 25 Nm |
| Flywheel/driveplate | 120 Nm/- |
| Clutch pressure plate | 19 Nm |
| Crankshaft pulley/damper bolts | 40 Nm+120° |
| Camshaft sprocket/gear | — |
| Camshaft carrier/cap | — |
| View more information | — |
| Injector/clamp | 10 Nm |
| Injector pipe unions | 24 Nm |
| Glow plugs | 18 Nm |
| Oil filter | 25 Nm |
| Chassis tightening torques | |
| Front hub | 292 Nm |
| Front hub - wheel bearing housing bolts | 96 Nm |
| Rear hub - wheel bearing housing bolts | 90 Nm |
| Brake caliper to carrier Front | 30 Nm |
| Brake caliper/carrier to hub Front | 107 Nm |
| Road wheels | 103 Nm |
Air conditioning
| No. of AC service connectors | 2 |
|---|---|
| Air conditioning restrictor type | Expansion valve |
| Compressor clutch/magnetic coupling | No |
| Compressor variable displacement solenoid | Yes |
| Air conditioning refrigerant Type | — |
| Do not mix R134a with R1234yf. | |
| Air conditioning refrigerant quantity grams | — |
| Air conditioning oil group | PAG |
| Air conditioning oil Type | — |
| Air conditioning oil quantity cm³ | 90+15 |
Frequently asked questions
What is the injection sequence of the Toyota Auris 1.6 D-4D?
The injection sequence for the Toyota Auris 1.6 D-4D (2015–2018) is 1-3-4-2.
How much oil does the Toyota Auris 1.6 D-4D take?
The Toyota Auris 1.6 D-4D (2015–2018) takes 5.2 litres of engine oil with the filter. The specified engine oil grade is SAE 5W-30 synthetic for all ambient temperatures, with API/ACEA classification /C3.
What are the valve clearances for the Toyota Auris 1.6 D-4D?
Valve clearances on the Toyota Auris 1.6 D-4D (2015–2018) are hydraulic — they self-adjust, so no manual clearance figure applies.