Mazda2022–2026Technical specifications

CX-60 2.5 PHEV: Technical specifications

Workshop data for the 2.5-litre petrol (engine code e-SKYACTIV-G 2.5). Covers engine, fluids, brakes, service, torques and air conditioning: the figures to check before a job or a parts order.

Common faults & fixes

Summary

Match the engine code (e-SKYACTIV-G 2.5) to the vehicle before ordering parts or applying these figures.

Vehicle specifications

Overview

Make: Mazda
Model: CX-60
Years: 2022–2026
Fuel: Petrol
Engine code: e-SKYACTIV-G 2.5

Performance & efficiency

Power: 141 kW (192 hp)
Engine size: 2,488 cc
Cylinders: 4 · DOHC
Compression ratio: 13.0:1
Fuel system: Mazda

Fluids & capacities

Engine oil (with the filter): 4.5 litres

All 115 specifications below

Engine & identification

Vehicle identification

No. of cylinders Type	4/DOHC
Capacity (Fiscal) cc	2488
Compression ratio :1	13,0
Suitable for unleaded petrol	Yes
Minimum octane rating RON	95
Ignition system Description	Map-DI
Trigger location	Cam/Crankshaft
Fuel system Make	Mazda
Fuel system Description	MFI-s(d)
Air metering Type	Mass/MAP
Combined ignition and fuel ECM	Yes
Diagnostic socket	Yes

Ignition system

Ignition coil Make	Mazda
Ignition coil Type	P51R-18-100
Ignition coil supply voltage + with ballast V	12,0

Firing order

The firing order for the Mazda CX-60 2.5 PHEV (2022–2026) is 1-3-4-2.

Firing order	1-3-4-2

Valve clearances

Valve clearances on the Mazda CX-60 2.5 PHEV (2022–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.

Valve clearance - INLET mm	Hydraulic
Valve clearance - EXHAUST mm	Hydraulic

Engine oil & fluids

Engine oil

The Mazda CX-60 2.5 PHEV (2022–2026) takes 4.5 litres of engine oil with the filter.

See the reference table for the complete engine oil entries and their conditions.

Transfer box

See the reference table for the complete transfer box entries and their conditions.

Coolant

See the reference table for the complete coolant entries and their conditions.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Preferred engine oil
Ambient temperature range	All temperatures
Engine oil grade SAE	—
Engine oil options
Ambient temperature range	All temperatures
Engine oil grade SAE	0W-20
Engine oil classification API/ACEA	SN/A5
Ambient temperature range	All temperatures
Engine oil grade SAE	5W-30
Engine oil classification API/ACEA	SN/A5
Engine with filter(s) litres	4.5
Other lubricants and capacities
Automatic transmission fluid Type	Mazda ATF A7
Automatic transmission (drain & refill) litres	8.1
Checking ATF level
Differential oil grade - front SAE	75W-85 Mazda hypoid gear oil SG1
Differential oil classification - front	GL-4
Differential front/AT litres	0.3-0.4
Differential oil grade - rear SAE	75W-85 Mazda hypoid gear oil SG1
Differential oil classification - rear	GL-4
Differential rear litres	0.85-0.95
Transfer box oil grade SAE	Mazda ATF A7
Transfer box litres	0.46-0.56
Coolant Type	FL22
Coolant Colour	Green
Cooling system - total capacity litres	—
Perform procedure within 60 seconds.
Brake fluid Type	DOT 3/4

Brakes & wear limits

Brake disc thickness

Brake discs on the Mazda CX-60 2.5 PHEV (2022–2026) are replaced at a minimum thickness of 30 mm (ventilated) or 30,8 mm (ventilated) front and 20 mm or 20,8 mm rear.

Minimum disc thickness for replacement - ventilated Front	30 mm
Minimum disc thickness after refacing - ventilated Front	30,8 mm
Minimum disc thickness for replacement Rear	20 mm
Minimum disc thickness after refacing Rear	20,8 mm

Brake disc and drum dimensions

Disc runout Front	0,04 mm
Disc runout Rear	0,1 mm
Minimum pad thickness Front	2 mm
Minimum pad thickness Rear	2 mm

Service & electrical

Spark plugs

The Mazda CX-60 2.5 PHEV (2022–2026) uses Beru Z355 spark plugs with a 1,0 mm electrode gap.

Spark plugs Original equipment	Denso
Spark plug Type	ZC20HPR11
Electrode gap mm	1,05-1,15
Spark plugs Make	Beru
Spark plug Type	Z355
Electrode gap mm	1,0
Spark plugs Make	Bosch
Spark plug Type	0 242 135 567
Electrode gap mm	0,9
Spark plugs Make	Champion
Spark plug Type	REA8WYPB4
Electrode gap mm	1,0
Spark plugs Make	NGK
Spark plug Type	ILKAR7L11
Electrode gap mm	1,05-1,15

Tuning and emissions

Idle speed rpm	775±25 Not adjustable

Starting and charging

Battery V/RC(Ah)	12

Service checks and adjustments

Oil pressure
Compression pressure bar	6,6-9,6
Oil pressure bar/rpm	1,4-1,7/1500
Radiator cap bar	0,93-1,23
Thermostat opens °C	80-93

Fuel system

Fuel feed/lift pump delivery pressure bar	4,8-5,6
Engine coolant temperature (ECT) sensor Ohm/°C	318/80
Injector Ohm	1,2-2,0
Throttle motor Ohm	0,3-100/20°C

Tightening torques

Cylinder head bolt torque

The cylinder head bolts on the Mazda CX-60 2.5 PHEV (2022–2026) are tightened in 4 stages: 15 Nm, then 45 Nm, then 90°, then a final 90°.

Cylinder head
Maximum bolt length	146,5
Tighten	15 Nm
Tighten	45 Nm
Tighten	90°
Tighten	90°

Other engine tightening torques
Cylinder head instructions	—
View more information	—
Oil pump to cylinder block	—
View more information	—
Oil pump to cylinder block
Sump bolts	23 Nm
View more information	—
If re-using existing bolts, ensure that they are cleaned before installation.
Sump drain bolt	36 Nm
Crankshaft pulley/damper centre bolt	110 Nm+60°±5°
Camshaft sprocket/gear	80 Nm
Camshaft carrier/cap	10 Nm
View more information	—
Camshaft carrier/cap
Camshaft/rocker cover	7 Nm
View more information	—
Camshaft/rocker cover
Inlet manifold to cylinder head	18 Nm
Exhaust manifold to cylinder head	54 Nm
Exhaust downpipe to manifold	45 Nm
Water pump	10 Nm
Spark plugs	18 Nm
Fuel rail	23 Nm
Crankshaft position (CKP) sensor/engine speed (RPM) sensor	9 Nm
Camshaft position (CMP) sensor	9 Nm
Engine coolant temperature (ECT) sensor	17 Nm
Lambda sensor (Oxygen)	42 Nm
Knock sensor (KS)	20 Nm
Engine oil pressure switch	10 Nm
Oil filter	14 Nm
Chassis tightening torques
Front hub	—
Front hub
Front hub - wheel bearing housing bolts	129 Nm
Rear hub	—
Rear hub
Rear hub - wheel bearing housing bolts	131 Nm
Steering wheel	48 Nm
Steering rack/box mounting	124 Nm
Steering track rod end	74 Nm
Brake caliper/carrier to hub Front	164 Nm
Brake caliper/carrier to hub Rear	153 Nm
ABS sensor Front	10 Nm
ABS sensor Rear	10 Nm
Road wheels	128 Nm

Air conditioning

Do not mix R134a with R1234yf.
No. of AC service connectors	2
Air conditioning restrictor type	Expansion valve
Compressor clutch/magnetic coupling	Yes
Compressor variable displacement solenoid	No
Air conditioning refrigerant Type	—
Air conditioning refrigerant quantity grams	R134a=840±25 R1234yf=760±25
Air conditioning oil group	PAG
Air conditioning oil Type	FD46XG
Air conditioning oil quantity cm³	180
Air conditioning oil viscosity ISO	46

Frequently asked questions

What is the firing order of the Mazda CX-60 2.5 PHEV?

The firing order for the Mazda CX-60 2.5 PHEV (2022–2026) is 1-3-4-2.

What spark plugs does the Mazda CX-60 2.5 PHEV use?

The Mazda CX-60 2.5 PHEV (2022–2026) uses Beru Z355 spark plugs with a 1,0 mm electrode gap.

How much oil does the Mazda CX-60 2.5 PHEV take?

The Mazda CX-60 2.5 PHEV (2022–2026) takes 4.5 litres of engine oil with the filter. See the reference table for the complete engine oil entries and their conditions.

What are the valve clearances for the Mazda CX-60 2.5 PHEV?

Valve clearances on the Mazda CX-60 2.5 PHEV (2022–2026) are hydraulic — they self-adjust, so no manual clearance figure applies.

What is the cylinder head torque for the Mazda CX-60 2.5 PHEV?

The cylinder head bolts on the Mazda CX-60 2.5 PHEV (2022–2026) are tightened in 4 stages: 15 Nm, then 45 Nm, then 90°, then a final 90°.

What is the minimum brake disc thickness for the Mazda CX-60 2.5 PHEV?

Brake discs on the Mazda CX-60 2.5 PHEV (2022–2026) are replaced at a minimum thickness of 30 mm (ventilated) or 30,8 mm (ventilated) front and 20 mm or 20,8 mm rear.