Mazda2021–2024Technical specifications

2 1.5 MHEV: Technical specifications

Workshop data for the 1.5-litre petrol (engine code e-SKYACTIV-G 1,5). Covers engine, fluids, brakes, service, torques and air conditioning: the figures to check before a job or a parts order.

Summary

Match the engine code (e-SKYACTIV-G 1,5) to the vehicle before ordering parts or applying these figures.

Vehicle specifications

Overview

Make: Mazda
Model: 2
Years: 2021–2024
Fuel: Petrol
Engine code: e-SKYACTIV-G 1,5

Performance & efficiency

Power: 85 kW (116 hp)
Engine size: 1,496 cc
Cylinders: 4 · DOHC
Compression ratio: 15.0:1
Fuel system: MFI-s(d)

Fluids & capacities

Engine oil (with the filter): 4.2 litres

All 103 specifications below

Engine & identification

Vehicle identification

No. of cylinders Type	4/DOHC
Capacity (Fiscal) cc	1496
Compression ratio :1	15,0
Suitable for unleaded petrol	Yes
Minimum octane rating RON	95
Ignition system Description	Map-DI
Trigger location	Cam/Crankshaft
Fuel system Description	MFI-s(d)
Air metering Type	Mass/MAP
Combined ignition and fuel ECM	Yes
Diagnostic socket	Yes

Ignition system

Ignition coil supply voltage + with ballast V	12,0

Firing order

The firing order for the Mazda 2 1.5 MHEV (2021–2024) is 1-3-4-2.

Firing order	1-3-4-2

Valve clearances

Valve clearances on the Mazda 2 1.5 MHEV (2021–2024) are hydraulic — they self-adjust, so no manual clearance figure applies.

Valve clearance - INLET mm	Hydraulic
Valve clearance - EXHAUST mm	Hydraulic

Engine oil & fluids

Engine oil

The Mazda 2 1.5 MHEV (2021–2024) takes 4.2 litres of engine oil with the filter.

See the reference table for the complete engine oil entries and their conditions.

Manual gearbox

The manual gearbox has a listed capacity of 1.6 litres. The specified oil is SAE 75W-80, with classification GL-4.

Coolant

See the reference table for the complete coolant entries and their conditions.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Preferred engine oil
Ambient temperature range	All temperatures
Engine oil grade SAE	—
Engine oil options
Ambient temperature range	All temperatures
Engine oil grade SAE	0W-20
Engine oil classification API/ACEA	SN/A5
Ambient temperature range	All temperatures
Engine oil grade SAE	5W-30
Engine oil classification API/ACEA	SN/A5
Engine with filter(s) litres	4.2
Other lubricants and capacities
Manual transmission oil grade SAE	75W-80
Manual transmission oil classification	GL-4
Manual transmission litres	1.6
Coolant Type	FL22
Coolant Colour	Green
Cooling system - total capacity litres	—
Cooling system
Brake fluid Type	DOT 3/4
Brake fluid classification	SAE J1703/FMVSS116
Clutch fluid Type	DOT 3/4
Clutch fluid classification	SAE J1703/FMVSS116

Brakes & wear limits

Brake disc thickness

Brake discs on the Mazda 2 1.5 MHEV (2021–2024) are replaced at a minimum thickness of 20 mm (ventilated) or 20,8 mm (ventilated) front and 7,5 mm or 8,3 mm rear.

Minimum disc thickness for replacement - ventilated Front	20 mm
Minimum disc thickness after refacing - ventilated Front	20,8 mm
Minimum disc thickness for replacement Rear	7,5 mm
Minimum disc thickness after refacing Rear	8,3 mm
Maximum drum diameter for replacement Rear	201,5 mm

Brake disc and drum dimensions

Disc runout Front	0,04 mm
Disc runout Rear	0,1 mm
Minimum pad thickness Front	2 mm
Minimum pad thickness Rear	2 mm
Minimum shoe thickness Rear	1,0 mm
Parking brake travel No. of notches	2-3

Service & electrical

Tuning and emissions

Idle speed and ignition timing
Tuning conditions	—
Ignition advance checks °Engine/rpm	ECM Controlled
Idle speed rpm	550±50 Not adjustable
Idle speed - alternative rpm	AT=750±50 Not adjustable

Starting and charging

Battery V/RC(Ah)	12

Service checks and adjustments

Oil pressure bar/rpm	1,4-1,7/1500
Radiator cap bar	0,93-1,22
Thermostat opens °C	86-90

Spark plugs

Spark plugs Original equipment	Mazda
Spark plug Type	PE5R/S-18-110
Electrode gap mm	1,05-1,40

Tightening torques

Cylinder head
Cylinder head instructions	—
Renew bolts	No
Maximum bolt length	146,5 mm
Tighten	15±2 Nm
Tighten	30±2 Nm
Tighten	90°±5°
Tighten	90°±5°
Other engine tightening torques
Main bearings Renew bolts/nuts	No
Main bearings Stage 1	—
View more information	—
Install bedplate within 10 minutes.
Big end bearings Renew bolts/nuts	No
Big end bearings Stage 1	—
View more information	—
Big end bearings
Oil pump to cylinder block	23±3 Nm
Sump bolts	—
View more information	—
Assemble components within 10 minutes. Ensure sealant does not enter bolt holes.
Sump drain bolt	36±5 Nm
Flywheel/driveplate	—
Flywheel/driveplate
Clutch pressure plate	29±4 Nm
Crankshaft pulley/damper centre bolt	100±10 Nm+60°±5°
Camshaft sprocket/gear	—
Camshaft sprocket/gear
Camshaft carrier/cap	1)6 Nm 2)11 Nm
View more information	—
Camshaft carrier/cap
Camshaft/rocker cover	6±1 Nm
Inlet manifold to cylinder head	18±2 Nm
Exhaust manifold to cylinder head	54±10 Nm
Exhaust downpipe to manifold	45±6 Nm
Water pump	23±3 Nm
Spark plugs	18±2 Nm
Fuel rail	23±3 Nm
Crankshaft position (CKP) sensor/engine speed (RPM) sensor	9±1 Nm
Camshaft position (CMP) sensor	9±1 Nm
Engine coolant temperature (ECT) sensor	15±1 Nm
Lambda sensor (Oxygen)	42±12 Nm
Knock sensor (KS)	20±3 Nm
Engine oil pressure switch	16±2 Nm
Oil filter	14±2 Nm
Chassis tightening torques
Front hub	—
Front/rear hub
Front hub - wheel bearing housing bolts	94±8 Nm
Rear hub - wheel bearing housing bolts	78±7 Nm
Steering wheel	48±6 Nm
Steering rack/box mounting	90±14 Nm
Steering track rod end	53±6 Nm
Steering track rod end
Brake caliper to carrier Front	26±5 Nm
Brake caliper/carrier to hub Front	92±10 Nm
Brake disc to hub Rear	12±2 Nm
Brake caliper to carrier Rear	26±5 Nm
Brake caliper/carrier to hub Rear	59±7 Nm
ABS sensor Front	9±1 Nm
ABS sensor Rear	9±1 Nm
Road wheels	128±19 Nm

Air conditioning

Do not mix R134a with R1234yf.
No. of AC service connectors	2
Air conditioning restrictor type	Expansion valve
Compressor clutch/magnetic coupling	Yes
Compressor variable displacement solenoid	No
Air conditioning refrigerant Type	R134a/R1234yf
Air conditioning refrigerant quantity grams	R134a=420±25 R1234yf=385±25
Air conditioning oil group	PAG
Air conditioning oil Type	R134a=ZXL200PG R1234yf=VC200YF
Air conditioning oil quantity cm³	60
Air conditioning oil viscosity ISO	46

Frequently asked questions

What is the firing order of the Mazda 2 1.5 MHEV?

The firing order for the Mazda 2 1.5 MHEV (2021–2024) is 1-3-4-2.

How much oil does the Mazda 2 1.5 MHEV take?

The Mazda 2 1.5 MHEV (2021–2024) takes 4.2 litres of engine oil with the filter. See the reference table for the complete engine oil entries and their conditions.

What are the valve clearances for the Mazda 2 1.5 MHEV?

Valve clearances on the Mazda 2 1.5 MHEV (2021–2024) are hydraulic — they self-adjust, so no manual clearance figure applies.

What is the minimum brake disc thickness for the Mazda 2 1.5 MHEV?

Brake discs on the Mazda 2 1.5 MHEV (2021–2024) are replaced at a minimum thickness of 20 mm (ventilated) or 20,8 mm (ventilated) front and 7,5 mm or 8,3 mm rear.