Engine & identification
Vehicle identification
| No. of cylinders Type | 3/OHV |
|---|---|
| Capacity cc | 1779 |
| Compression ratio :1 | 22,0 |
Injection system
| Fuel/injection pump assembly Make | Bosch |
|---|---|
| Fuel/injection pump assembly Type | VE 3/10 |
| Fuel/injection pump assembly Part No. | 0 460 403 008 |
| Fuel/injection pump assembly Part No. | F2100 L227 |
| Fuel feed/lift pump delivery pressure bar | 0,2 |
| Injector nozzle Make | Bosch |
| Nozzle and holder assembly Part No. | 0 432 297 047 |
| Nozzle opening pressure - new/used bar | 155/140 |
| Leak rate (dribble) bar/secs | 127/- |
Injection sequence
The injection sequence for the Alfa Romeo 33 1.8 Turbo (1986–1989) is 1-3-2.
| Injection sequence | 1-3-2 |
|---|
Valve clearances
Valve clearances for the Alfa Romeo 33 1.8 Turbo (1986–1989) are 0,30 mm inlet and 0,30 mm exhaust, measured cold.
| Valve clearance - INLET mm | 0,30 cold |
|---|---|
| Valve clearance - EXHAUST mm | 0,30 cold |
Engine oil & fluids
Engine oil
The Alfa Romeo 33 1.8 Turbo (1986–1989) takes 5.2 litres of engine oil with the filter.
A listed engine oil option is SAE 15W-40 for moderate climates, with API/ACEA classification CF/B2.
A listed engine oil option is SAE 10W-40 as an alternative for moderate climates, with API/ACEA classification CF/B3.
Manual gearbox
The manual gearbox has a listed capacity of 2.6 litres. The specified oil is SAE 75W-90.
Coolant
The listed total cooling-system capacity is 8.0 litres.
Grades, filling conditions and capacities
| Engine oil options | |
|---|---|
| Ambient temperature range | Moderate climate |
| Engine oil grade SAE | 15W-40 |
| Engine oil classification API/ACEA | CF/B2 |
| Ambient temperature range | Moderate climate alternative |
| Engine oil grade SAE | 10W-40 |
| Engine oil classification API/ACEA | CF/B3 |
| Engine with filter(s) litres | 5.2 |
| Other lubricants and capacities | |
| Manual transmission oil grade SAE | 75W-90 |
| Manual transmission litres | 2.6 |
| Cooling system - total capacity litres | 8.0 |
Brakes & wear limits
Brake disc thickness
Brake discs on the Alfa Romeo 33 1.8 Turbo (1986–1989) are replaced at a minimum thickness of 10,2 mm (solid) or 20,2 mm (ventilated) front; the rear brake drums are replaced at a maximum diameter of 204,5 mm.
| Minimum disc thickness for replacement - solid Front | 10,2 mm |
|---|---|
| Minimum disc thickness for replacement - ventilated Front | 20,2 mm |
| Maximum drum diameter for replacement Rear | 204,5 mm |
Brake disc and drum dimensions
| Disc runout Front | 0,15 mm |
|---|---|
| Minimum pad thickness Front | 1,5 mm |
| Parking brake travel No. of notches | 1-3 |
Service & electrical
Battery
The Alfa Romeo 33 1.8 Turbo (1986–1989) uses a 12 V, 70 Ah battery (reserve capacity 110 minutes).
| Battery V/RC(Ah) | 12/110 (70) |
|---|
Glow plugs
Glow plugs for the Alfa Romeo 33 1.8 Turbo (1986–1989): Beru 657 MJ, Bosch 0 250 201 012, Champion CH70 and Lucas/CAV HDS267.
| Glow plug nominal rating V/A | 11/13 |
|---|---|
| Glow plug activation time secs | 10 Max |
| Glow plug - part no. Beru | 657 MJ |
| Glow plug - part no. Bosch | 0 250 201 012 |
| Glow plug - part no. Champion | CH70 |
| Glow plug - part no. Lucas/CAV | HDS267 |
Tuning and emissions
| Plunger travel (pump) mm ABDC | 1,00-1,03 |
|---|---|
| Crankshaft position (n = ATDC) °BTDC | — |
| Adjusting method Engine/Pump | Pointer/Dial gauge |
| Dynamic timing v = BTDC, n = ATDC | v |
| - Tecnotest °/rpm | 5±1/800±50 |
| Idle speed rpm | 900±25 |
| Rated no load speed rpm | 4000 |
| Oil temperature °C | 80 |
| Maximum time at governed speed secs | 1,0 |
| Test mode A/B | B |
| Probe type 1/2 | 1 |
| Conditioning Accelerations/rpm | 2-3 |
| Smoke opacity - EU limit m-1 (%) | 3,00 (73) |
| Smoke opacity - homologation value m-1 (%) | 2,50 (66) |
Starting and charging
| Starter motor Make | Bosch |
|---|---|
| Starter motor Type | 0 001 218 023 |
| Maximum cranking amps A | 189-231 |
| Alternator Make | Bosch |
| Alternator Type | 0 120 489 212 |
| Alternator output A/V/rpm | 65/14/3000 |
| Regulated voltage V | 13,7-14,2 |
Service checks and adjustments
| Compression pressure bar | 21,6 |
|---|---|
| Oil pressure bar/rpm | 4,0-5,5/4000 |
| Radiator cap bar | 0,90-1,10 |
| Thermostat opens °C | 83±2 |
Tightening torques
| Cylinder head instructions | — |
|---|---|
| View more information | — |
| Cylinder head | |
| Renew bolts | No |
| Other engine tightening torques | |
| Main bearings Renew bolts/nuts | No |
| Main bearings Stage 1 | 24 Nm |
| Main bearings Stage 2 | 45-49 Nm |
| Big end bearings Renew bolts/nuts | No |
| Big end bearings Stage 1 | 42 Nm |
| Big end bearings Stage 2 | 84 Nm |
| Oil pump to cylinder block | 25 Nm |
| Sump bolts | 10 Nm |
| Sump drain bolt | 78 Nm |
| Flywheel/driveplate | 108 Nm |
| Clutch pressure plate | 15-23 Nm |
| Crankshaft pulley/damper centre bolt | 147-157 Nm |
| Camshaft/rocker cover | 15 Nm |
| Inlet manifold to cylinder head | 30 Nm |
| Exhaust manifold to cylinder head | 30 Nm |
| Injector/clamp | 25-29 Nm |
| Injector pipe unions | 15-20 Nm |
| Fuel/injection pump sprocket/gear | 88 Nm |
| Glow plugs | 23-25 Nm |
| Chassis tightening torques | |
| Front hub | 226-275 Nm |
| Steering track rod end | 39-48 Nm |
| Brake disc to hub Front | 12 Nm |
| Brake caliper/carrier to hub Front | 66 Nm |
| Road wheels | 88-108 Nm |
Air conditioning
| Air conditioning refrigerant Type | R12 |
|---|---|
| Air conditioning refrigerant quantity grams | 900 |
| Air conditioning oil Type | Suniso 46 |
Frequently asked questions
What is the injection sequence of the Alfa Romeo 33 1.8 Turbo?
The injection sequence for the Alfa Romeo 33 1.8 Turbo (1986–1989) is 1-3-2.
What glow plugs does the Alfa Romeo 33 1.8 Turbo use?
Glow plugs for the Alfa Romeo 33 1.8 Turbo (1986–1989): Beru 657 MJ, Bosch 0 250 201 012, Champion CH70 and Lucas/CAV HDS267.
How much oil does the Alfa Romeo 33 1.8 Turbo take?
The Alfa Romeo 33 1.8 Turbo (1986–1989) takes 5.2 litres of engine oil with the filter. A listed engine oil option is SAE 15W-40 for moderate climates, with API/ACEA classification CF/B2. A listed engine oil option is SAE 10W-40 as an alternative for moderate climates, with API/ACEA classification CF/B3.
What are the valve clearances for the Alfa Romeo 33 1.8 Turbo?
Valve clearances for the Alfa Romeo 33 1.8 Turbo (1986–1989) are 0,30 mm inlet and 0,30 mm exhaust, measured cold.
What is the minimum brake disc thickness for the Alfa Romeo 33 1.8 Turbo?
Brake discs on the Alfa Romeo 33 1.8 Turbo (1986–1989) are replaced at a minimum thickness of 10,2 mm (solid) or 20,2 mm (ventilated) front; the rear brake drums are replaced at a maximum diameter of 204,5 mm.
What battery does the Alfa Romeo 33 1.8 Turbo use?
The Alfa Romeo 33 1.8 Turbo (1986–1989) uses a 12 V, 70 Ah battery (reserve capacity 110 minutes).