Alfa Romeo1993–1998Technical specifications

155 2.5 Turbo: Technical specifications

Workshop data for the 2.5-litre diesel (engine code VM07B). Covers engine, fluids, brakes, service, torques and air conditioning: the figures to check before a job or a parts order.

Summary

Match the engine code (VM07B) to the vehicle before ordering parts or applying these figures.

Vehicle specifications

Overview

Make
Alfa Romeo
Model
155
Years
1993–1998
Fuel
Diesel
Engine code
VM07B

Performance & efficiency

Power
92 kW (125 hp)
Engine size
2,499 cc
Cylinders
4 · OHC

Fluids & capacities

Engine oil (with the filter)
6.3 litres
All 100 specifications below

Engine & identification

Vehicle identification

No. of cylinders Type4/OHC
Capacity cc2499

Injection system

Fuel/injection pump assembly MakeBosch
Fuel/injection pump assembly TypeVEL 450
Fuel/injection pump assembly Part No.0 460 404 997
Pump typeRotary
Injector nozzle MakeBosch
Nozzle and holder assembly Part No.0 432 217 222

Injection sequence

The injection sequence for the Alfa Romeo 155 2.5 Turbo (1993–1998) is 1-3-4-2.

Injection sequence1-3-4-2

Valve clearances

Valve clearances for the Alfa Romeo 155 2.5 Turbo (1993–1998) are 0,25-0,35 mm inlet and 0,25-0,35 mm exhaust, measured cold.

Valve clearance - INLET mm0,25-0,35 cold
Valve clearance - EXHAUST mm0,25-0,35 cold

Engine oil & fluids

Engine oil

The Alfa Romeo 155 2.5 Turbo (1993–1998) takes 6.3 litres of engine oil with the filter.

See the reference table for the complete engine oil entries and their conditions.

Manual gearbox

The manual gearbox has a listed capacity of 2.0 litres. The specified oil is SAE 75W-90.

Coolant

The listed total cooling-system capacity is 8.0 litres.

Grades, filling conditions and capacities

Lubricants and capacities — complete reference
Engine oil options
Ambient temperature range All temperatures
Engine oil grade SAE 5W-40 Synthetic
Engine oil classification API/ACEA CF/B3
Ambient temperature range -15°C➞
Engine oil grade SAE 10W-40 Synthetic
Engine oil classification API/ACEA CF/B3
Engine with filter(s) litres 6.3
Other lubricants and capacities
Manual transmission oil grade SAE 75W-90
Manual transmission litres 2.0
Cooling system - total capacity litres 8.0
Brake fluid Type DOT 4
Brake fluid litres 0.6
Power steering fluid Type Dexron II
Power steering fluid litres 1.0

Brakes & wear limits

Brake disc thickness

Brake discs on the Alfa Romeo 155 2.5 Turbo (1993–1998) are replaced at a minimum thickness of 20,2 mm (ventilated) front and 9,2 mm rear.

Minimum disc thickness for replacement - ventilated Front20,2 mm
Minimum disc thickness for replacement Rear9,2 mm

Brake disc and drum dimensions

Disc runout Front0,15 mm
Disc runout Rear0,15 mm
Minimum pad thickness Front1,5 mm
Minimum pad thickness Rear1,5 mm
Parking brake travel No. of notches1-3

Service & electrical

Battery

The Alfa Romeo 155 2.5 Turbo (1993–1998) uses a 12 V, 90 Ah battery (reserve capacity 160 minutes).

Battery V/RC(Ah)12/160 (90)

Glow plugs

Glow plugs for the Alfa Romeo 155 2.5 Turbo (1993–1998): Beru 657 MJ, Bosch 0 250 201 033, Champion CH163 and Lucas/CAV HDS348.

Glow plug nominal rating V/A11/13
Glow plug activation time secs10 Max
Glow plug - part no. Beru657 MJ
Glow plug - part no. Bosch0 250 201 033
Glow plug - part no. ChampionCH163
Glow plug - part no. Lucas/CAVHDS348

Tuning and emissions

Crankshaft position (n = ATDC) °BTDC—
Adjusting method Engine/PumpPointer/Dial gauge
Idle speed rpm820-860
Oil temperature °C80
Idle speed - for smoke test rpm820-860
Governed speed range - for smoke test rpm4550-4750
Maximum time at governed speed secs1,0
Test mode A/BB
Probe type 1/21
Conditioning Accelerations/rpm2-3
Smoke opacity - EU limit m-1 (%)3,00 (73)
Smoke opacity - homologation value m-1 (%)1,03 (36)

Starting and charging

Starter motor MakeBosch
Starter motor Type0 001 218 125
Maximum cranking amps A243-297
Alternator MakeBosch
Alternator Type0 123 345 004
Alternator output A/V/rpm85/14/3000

Service checks and adjustments

Oil pressure bar/rpm3,9-5,4/5000
Radiator cap bar0,98-1,08
Thermostat opens °C81-85
Drive belt size - alternator mm9,5x838

Tightening torques

Cylinder head instructions—
View more information—
Cylinder head
Renew boltsNo
Other engine tightening torques
Main bearings Renew bolts/nutsNo
Main bearings Stage 123 Nm
Main bearings Stage 243-48 Nm
Big end bearings Renew bolts/nutsNo
Big end bearings Stage 140 Nm
Big end bearings Stage 279-84 Nm
Oil pump to cylinder block25 Nm
Sump bolts10 Nm
Sump drain bolt78 Nm
Flywheel/driveplate108 Nm
Clutch pressure plate33-40 Nm
Crankshaft pulley/damper centre bolt127 Nm/176 Nm
Inlet manifold to cylinder head30 Nm
Exhaust manifold to cylinder head30 Nm
Injector/clamp24-29 Nm
Injector pipe unions15-20 Nm
Fuel/injection pump sprocket/gear88 Nm
Fuel/injection pump flange30 Nm
Glow plugs22-24 Nm
Chassis tightening torques
Rear hub—
View more information—
Steering track rod end29-35 Nm
Brake disc to hub Front12 Nm
Brake caliper to carrier Front50 Nm
Brake caliper/carrier to hub Front22 Nm
Brake disc to hub Rear12 Nm
Brake caliper to carrier Rear50 Nm
Brake caliper/carrier to hub Rear22 Nm
ABS sensor Front5 Nm
ABS sensor Rear5 Nm
Road wheels82±9 Nm Alu=93±10 Nm

Air conditioning

No. of AC service connectors2
Air conditioning restrictor typeExpansion valve
Compressor clutch/magnetic couplingYes
Compressor variable displacement solenoidNo
Air conditioning refrigerant TypeR134a
Air conditioning refrigerant quantity grams700
Air conditioning oil groupPAG
Air conditioning oil TypeSP20
Air conditioning oil quantity cm³240
Air conditioning oil viscosity ISO100

Frequently asked questions

What is the injection sequence of the Alfa Romeo 155 2.5 Turbo?

The injection sequence for the Alfa Romeo 155 2.5 Turbo (1993–1998) is 1-3-4-2.

What glow plugs does the Alfa Romeo 155 2.5 Turbo use?

Glow plugs for the Alfa Romeo 155 2.5 Turbo (1993–1998): Beru 657 MJ, Bosch 0 250 201 033, Champion CH163 and Lucas/CAV HDS348.

How much oil does the Alfa Romeo 155 2.5 Turbo take?

The Alfa Romeo 155 2.5 Turbo (1993–1998) takes 6.3 litres of engine oil with the filter. See the reference table for the complete engine oil entries and their conditions.

What are the valve clearances for the Alfa Romeo 155 2.5 Turbo?

Valve clearances for the Alfa Romeo 155 2.5 Turbo (1993–1998) are 0,25-0,35 mm inlet and 0,25-0,35 mm exhaust, measured cold.

What is the minimum brake disc thickness for the Alfa Romeo 155 2.5 Turbo?

Brake discs on the Alfa Romeo 155 2.5 Turbo (1993–1998) are replaced at a minimum thickness of 20,2 mm (ventilated) front and 9,2 mm rear.

What battery does the Alfa Romeo 155 2.5 Turbo use?

The Alfa Romeo 155 2.5 Turbo (1993–1998) uses a 12 V, 90 Ah battery (reserve capacity 160 minutes).

More on the 155