Land Rover2005–2009

Range Rover Sport 4.2 Supercharged 390 hp: Common faults & known problems

Common faults & known problems

25 known faults documented in workshop bulletins. Of these, five concern the clutch and gearbox and four the engine and fuel system. Symptoms, causes, repair steps and part numbers are shown where supplied.

Engine & fuel system

4 documented faults — symptoms, causes and workshop fixes.

Knocking noise from front seats during stop/start driving

Affects Range Rover Sport: VIN A163998-9A207607.Fit modified part

Cause

Rubber damper incorporated in front seat runner inadequate.

Repair

  1. Fit modified seat runner.
Parts2 parts
Parts listed in the bulletin
PartPart numberQty
Front seat runner - without seat position memoryLR0120401
Front seat runner - with seat position memoryLR0120411

Data: Motorwise Workshop. Bulletin 5.

Engine malfunction indicator lamp (MIL) illuminated

Affects Range Rover Sport: Engine code 428PS, VIN LS5A900325-LS7A119896. Range Rover Sport: Engine code 448PN, VIN LS5A900290-LS7A119896.P0170P0173P2097P2099P0461Software update

Symptoms

Trouble codes stored: P0170, P0173, P2097, P2099, P0461.

Cause

Engine control module (ECM) software fault.

Repair

  1. Re-program engine control module (ECM) with upgraded software.

Data: Motorwise Workshop. Bulletin 8.

Rear differential pinion oil seal leaking

Affects Range Rover Sport: VIN 5A900013→.Fit new part

Cause

Excessive wear between rear differential pinion and pinion seal.

Repair

  1. Fit new rear differential pinion oil seal. Position pinion seal further into differential housing to avoid worn pinion shaft surface.
Parts4 parts
Parts listed in the bulletin
PartPart numberQty
Rear differential pinion oil sealTZB5001001
Rear propeller shaft boltsTYG5001304
Differential oil (without differential lock)TYK5000101
Differential oil (with differential lock)TYK5000701

Data: Motorwise Workshop. Bulletin 9.

Engine malfunction indicator lamp (MIL) illuminated

Overview

Affects
All models with petrol engines, VIN 5A900505-6A955013.
Fault codes
P0137P0157
Remedy
Software update

Cause

Engine control module (ECM) software mapping fault.

Repair

  1. Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
  2. If no fault(s) found: Re-program ECM with upgraded software.

Data: Motorwise Workshop. Bulletin 23.

Electrical & ignition

4 documented faults — symptoms, causes and workshop fixes.

Battery discharged

Overview

Affects
Range Rover Sport: VIN 8A119898→.
Remedy
Software update

Cause

Instrument panel does not switch to sleep mode due to software fault.

Repair

  1. Re-program instrument panel with upgraded software.
  2. Charge battery if necessary.

Data: Motorwise Workshop. Bulletin 7.

TPMS warning lamp illuminated

Affects All models: Discovery 4: VIN LA510178→. Range Rover: VIN LM302697→. Range Rover Sport: VIN LS212145→.Fit modified part

Symptoms

TPMS warning message displayed in multifunction display. Trouble codes related to TPMS stored in fault memory.

Cause

Signal interference from alternator.

Repair

  1. Fit modified TPMS sensors.
Parts1 part
Parts listed in the bulletin
PartPart numberQty
TPMS sensorLR031713, or LR0317125

Data: Motorwise Workshop. Bulletin 15.

Instrument panel warning lamps illuminated

Unsatisfactory design of A-post outer trim panel locating pin seal allowing water ingress. Fix: use a repair kit.

Overview

Affects
All models, VIN 5A900500→.
Remedy
Repair kit

Symptoms

Water ingress into front footwells.

Repair steps

  1. Carry out water test to A-post area to confirm fault.
  2. Remove A-post outer trim panel.
  3. Cut off A-post outer trim panel locating pin.
  4. Seal bodywork alignment hole with repair kit.
  5. Repeat procedure for opposite side.

Parts

Parts listed in the bulletin
PartPart numberQty
Repair kitDHB5004301

Data: Motorwise Workshop. Bulletin 20.

Intermittent self-activation of alarm system siren

Affects All models.Fit new part

Symptoms

Audible warning sounds when locking vehicle. Bonnet open warning message displayed in instrument panel.

Cause

Repair

  1. Fit new bonnet switch. Bonnet switch integral to bonnet latch.
Parts1 part
Parts listed in the bulletin
PartPart numberQty
Bonnet switchLR0543311

Data: Motorwise Workshop. Bulletin 25.

Brakes

3 documented faults — symptoms, causes and workshop fixes.

Squeal from rear brakes when braking lightly

Vibration between brake pads and discs. Fix: fit a modified part.

Overview

Affects
Range Rover Sport: VIN 900290-207274.
Remedy
Fit modified part

Repair steps

  1. Remove rear brake pads.
  2. Clean and lubricate rear brake caliper carrier.
  3. Fit modified rear brake pads.

Parts

Parts listed in the bulletin
PartPart numberQty
Rear brake padsLR0168081

Data: Motorwise Workshop. Bulletin 6.

Excessive heat build up in rear brakes

Overview

Affects
All models with electric parking brake (EPB): Discovery 3: VIN 5A000259→. Discovery 4: VIN AA513326→. Range Rover Sport: VIN 5A900106→.
Remedy
Software update

Symptoms

Electric parking brake (EPB) warning lamp illuminated. Squeal from rear brakes when driving. Squeal from rear brakes when electric parking brake (EPB) is operated. Trouble codes stored: C1A43, C1A53, C1A46.

Cause

Parking brake shoes binding.

Parking brake shoes seizing due to build up of debris.

EPB control module software fault.

Repair steps

  1. Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
  2. Ensure parking brake shoes are correctly adjusted.
  3. If no fault(s) found: Re-program EPB control module with upgraded software.

Data: Motorwise Workshop. Bulletin 17.

Front brake judder

Front brake disc distortion. Fix: fit a modified part.

Overview

Affects
All models: Discovery 4: VIN AA513326-AA555717. Range Rover Sport: VIN AA215623-AA276763.
Remedy
Fit modified part

Repair steps

  1. Fit new front brake discs.
  2. Check front brake disc runout. If front brake disc runout is greater than 0.03 mm: Remove front brake discs. Check front hub runout. If front hub runout is greater than 0.014 mm: Replace front hubs. Fit front brake discs.
  3. Fit modified front brake pads.

Data: Motorwise Workshop. Bulletin 18.

Suspension & drivetrain

2 documented faults — symptoms, causes and workshop fixes.

Knocking noise from front/rear suspension

Anti-roll bar bushes move in 'D' brackets. Fix: adjust and tighten.

Overview

Affects
Discovery 3 (04-), 2004-09: VIN 000303→.Range Rover (02-), 2002-09: VIN 900290→ without active cornering enhancement (ACE).
Remedy
Adjust & tighten

Repair steps

  1. Loosen bolts of anti-roll bar bush mountings.
  2. Fit wedges to anti-roll bar bush mountings.
  3. Tighten bolts of front anti-roll bar bush mountings to 62 Nm.
  4. Tighten bolts of rear anti-roll bar bush mountings to 115 Nm.

Parts

Parts listed in the bulletin
PartPart numberQty
Wedge kitLR124101

Data: Motorwise Workshop. Bulletin 2.

When vehicle parked on level surface ride height appears uneven

Overview

Affects
All models with air suspension or active cornering enhancement (ACE).
Remedy
Software update

Cause

Suspension level adjustment not carried out when vehicle parked due to suspension control module software fault.

Repair

  1. Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
  2. If no fault(s) found: Re-program suspension control module with upgraded software.

Data: Motorwise Workshop. Bulletin 24.

Steering

2 documented faults — symptoms, causes and workshop fixes.

Knocking noise from front of vehicle over uneven surfaces

Affects Range Rover Sport, VIN 900109-122778.

Cause

Excessive free play in steering mechanism.

Repair

  1. Check for excessive free play in steering column. Replace component(s) as necessary.
Parts5 parts
Parts listed in the bulletin
PartPart numberQty
Steering column upper intermediate shaftQLB5000701
Steering column upper intermediate shaft boltQYG10016L1
Steering column lower intermediate shaft boltQYG5001001
Steering column lower intermediate shaft - RHDQMN5002401
Steering column lower intermediate shaft - LHDQMN5002501

Data: Motorwise Workshop. Bulletin 12.

Steering wheel vibration when driving

Overview

Affects
All models, VIN 5A900302→.
Remedy
Fit modified part

Cause

Flat spot on tyre.

Wheels out of balance.

Front suspension lower arm bush faulty.

Power steering rack faulty.

Defective steering wheel.

Repair

  1. Check tyre condition, tyre pressure and wheel balance.
  2. If fault still present: Fit new front suspension lower arm bushes. Fit new power steering rack. Fit modified steering wheel.

Data: Motorwise Workshop. Bulletin 19.

Clutch & gearbox

5 documented faults — symptoms, causes and workshop fixes.

Message centre displays 'Transmission Fault Stop Safely'

Overview

Affects
Range Rover Sport: VIN LS5A900106-LS9A215620.
Fault codes
P0806
Remedy
Fit new part
Parts
2 parts

Symptoms

Possible trouble codes stored: P080A, P0806, P186D (rear differential lock actuator stuck).

Cause

Rear differential lock actuator stuck.

Rear differential lock control module software fault.

Repair

  1. Fit new rear differential lock actuator.
  2. Re-program rear differential lock control module with upgraded software.
Parts2 parts
Parts listed in the bulletin
PartPart numberQty
Rear differential lock actuatorLR011036Discovery 3/Range Rover Sport
Rear differential lock actuatorTVK500350Range Rover

Data: Motorwise Workshop. Bulletin 3.

Poor cold starting

Affects Range Rover Sport, 2005-09: VIN 6A900290→.Software update

Cause

Engine control module (ECM)/transmission control module (TCM) software fault.

Repair

  1. Install upgraded ECM/TCM software.

Data: Motorwise Workshop. Bulletin 4.

Oil leak from transmission

Affects All models with 6HP transmission code: Discovery 3, VIN 5A000303→. Range Rover, VIN 6A198058→. Range Rover Sport, VIN 5A900109→.Fit new part

Cause

Transmission input shaft oil seal faulty.

Repair

  1. Fit new transmission input shaft oil seal.
Parts1 part
Parts listed in the bulletin
PartPart numberQty
Transmission input shaft oil sealTZB5000301

Data: Motorwise Workshop. Bulletin 10.

Poor gear shifting when down-shifting between 2nd-1st ranges

Overview

Affects
All models with automatic transmission: Discovery 3, VIN 5A000360-6A402253. Range Rover, VIN 6A198058-7A263534. Range Rover Sport, VIN 5A900302-7A119896.
Remedy
Software update

Cause

Transmission control module (TCM) software fault.

Repair

  1. Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
  2. If no fault(s) found: Re-program TCM with upgraded software.

Data: Motorwise Workshop. Bulletin 11.

Selector lever stiff when selecting forward gear

Affects All models with automatic transmission, VIN 5A900505-6A956724.P0850Fit new part

Symptoms

Trouble code stored in transmission control module (TCM) fault memory: P0850

Cause

Gear selector cable pivot bolt bush (located on transmission) worn due to clamp nut being overtightened.

Repair

  1. Fit new gear selector cable pivot bolt bush. Tighten gear selector cable clamp nut to the correct torque of 10 - 12 Nm.
Parts1 part
Parts listed in the bulletin
PartPart numberQty
Gear selector cable pivot bolt bushUCD500301

Data: Motorwise Workshop. Bulletin 22.

Body & trim

2 documented faults — symptoms, causes and workshop fixes.

Clock cannot be set to correct time

Overview

Affects
All models with analogue clock: Discovery 4: VIN 510178-525032. Range Rover Sport: VIN 212145-230615.
Remedy
Software update

Cause

Repair

  1. Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
  2. If no fault(s) found: Re-program multifunction control module with upgraded software.

Data: Motorwise Workshop. Bulletin 16.

Reverse dipping door mirror not working correctly

Overview

Affects
All models with reverse dipping door mirror: Discovery 3: VIN 5A300394-7A427985. Range Rover Sport: VIN 5A900505-7A999465.
Remedy
Fit new part
Parts
1 part

Cause

Driver's seat adjustment control module faulty.

Repair

  1. Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
  2. If no fault(s) found: Fit new seat adjustment control module.
Parts1 part
Parts listed in the bulletin
PartPart numberQty
Seat adjustment control moduleYWC5008001

Data: Motorwise Workshop. Bulletin 21.

Wipers & visibility

1 documented fault — symptoms, causes and workshop fixes.

Erratic front wiper operation

Front wiper arm loose, allowing wiper spindle to rotate without moving wiper arm. Fix: adjust and tighten.

Overview

Affects
Range Rover Sport, 2005-09: VIN 900505→.
Remedy
Adjust & tighten

Symptoms

Front wipers not working.

Repair steps

  1. Remove wiper arm nut protective cover and remove nut.
  2. If wiper arm has come loose from spindle inspect affected components for damage. Replace components as necessary.
  3. Ensure wiper motor is in park position.
  4. Fit front wiper arm. Tighten wiper arm nut as follows:.
  5. Freelander (97-06): 18 Nm.
  6. Freelander 2 (06-): 25 Nm.
  7. 90/110/130/Defender: 17 Nm.
  8. Discovery 3 (04-): 18 Nm.
  9. Range Rover (02-): 18 Nm.
  10. Range Rover Sport: 34 Nm.

Data: Motorwise Workshop. Bulletin 1.

Other

2 documented faults — symptoms, causes and workshop fixes.

Noise/vibration from front or rear of vehicle whilst driving

Overview

Affects
All models with active cornering enhancement (ACE).
Remedy
Software update

Cause

Software fault in active cornering enhancement (ACE) control module.

Repair

  1. Carry out electrical, mechanical and component tests (as applicable) to eliminate any other possible cause(s).
  2. If no fault(s) found: Re-program active cornering enhancement (ACE) control module with upgraded software.

Data: Motorwise Workshop. Bulletin 13.

Abnormal noise from auxiliary drive belt

Auxiliary drive belt guide pulley faulty, allowing auxiliary drive belt to contact mounting bracket. Fix: fit a modified part.

Overview

Affects
Range Rover Sport, VIN 5A900505-7A129334.
Remedy
Fit modified part

Repair steps

  1. Remove auxiliary drive belt guide pulley mounting bracket.
  2. Modify mounting bracket to increase clearance where contact has occurred&.
  3. Fit modified auxiliary drive belt guide pulley.

Parts

Parts listed in the bulletin
PartPart numberQty
Guide pulleyPQR5003501
Auxiliary drive beltRefer to manufacturer1

Data: Motorwise Workshop. Bulletin 14.

Glossary

Technical terms used in this guide.

ECM
Engine control module — the electronic unit that manages the engine
VIN
Vehicle identification number — 17 characters, found at the base of the windscreen and on the V5C logbook
Nm
Newton-metres — the standard unit for how tightly a bolt is done up
Trouble Codes
Standardised fault codes stored by the engine control module, read with a diagnostic tool
ACE
Active Cornering Enhancement — a hydraulic anti-roll system that stiffens the suspension in corners
EPB
Electric parking brake — an electronic handbrake, operated by a switch rather than a lever
TCM
Transmission control module — the electronic unit that manages the gearbox
TPMS
Tyre pressure monitoring system — warns if a tyre is under-inflated
Actuator
A motor or solenoid that moves a mechanical part on command
Air Suspension
A system that uses air springs instead of steel coils, so ride height can be raised or lowered
Anti-Roll Bar
A bar that links the left and right suspension to cut body roll in corners
Caliper
The part that squeezes the brake pads onto the disc
Control Module
A control unit for one of the vehicle's systems (engine, gearbox, brakes, body, and so on)
Disc Runout
How much a brake disc wobbles; too much causes vibration or squeal
Fault Memory
The list of stored trouble codes in a control module
Instrument Panel
The dashboard display that shows warning lights and messages
Multifunction Control Module
The control module that runs shared electrical functions (lights, wipers, locking, and so on)
Pinion Oil Seal
The seal on a differential pinion shaft — a common source of oil leaks
Rear Differential Lock
A locker that forces both rear wheels to turn together for extra traction
Re-Program
Update the software on a control module using the manufacturer's diagnostic tool
Selector Cable
The cable that connects the gear lever to the gearbox
Trouble Code
A standardised fault code stored by a control module, read with a diagnostic tool
Alternator
The unit that charges the battery while the engine is running
Auxiliary Drive Belt
The belt that drives the alternator, water pump, steering pump or air-conditioning compressor
Bonnet Switch
The switch that tells the alarm whether the bonnet is open
Bush
A rubber mounting that lets a suspension or body joint move without metal-to-metal contact
Bushes
Rubber mountings that let a suspension or body joint move without metal-to-metal contact
Lower Arm
A suspension link that locates the wheel at the bottom of the hub
Oil Seal
A rubber seal that keeps oil in and dirt out, typically around a rotating shaft
Sleep Mode
The low-power state control modules enter when the car is parked; if one stays awake the battery can go flat

Frequently asked questions

What are the common faults with the Land Rover Range Rover Sport 4.2 Supercharged?

This guide contains 25 workshop bulletins for the Land Rover Range Rover Sport 4.2 Supercharged. Of these, five concern the clutch and gearbox and four the engine and fuel system. Symptoms, causes, repair steps and part numbers are shown where supplied.

Does every Land Rover Range Rover Sport 4.2 Supercharged have these faults?

No. These are patterns documented across the model by workshops, not predictions for an individual vehicle. Where a fault applies only to certain vehicles or VIN ranges, that is listed with the fault.

Can I check for Land Rover Range Rover Sport 4.2 Supercharged faults myself?

Many of them. The documented symptoms can be seen, heard or felt during a test drive.

Related guides

Glossary term

See in the glossary →